Adjustable Pressure
2011
Adjustable Pressure
![]() |
Low Pressure vs. High Pressure Paintball Tanks
Should I get a high pressure or low pressure N2 or HPA tank for
my paintball gun?
That's a good question. Let's get a few things straight first.
The terms "nitrogen tank" and "high pressure air" (HPA) tank
mean the same thing. Fields and stores use compressed air to
fill the tanks because air is more easily accessible. In the
past, nitrogen was more readily available to fields than more
expensive compressors. Today if you walk into a store and ask
for a nitro tank or a nitro fill they will know what you mean.
Second, "high pressure" or "low pressure" refers to the actual
output pressure of the regulator on your tank. The regulator
controls the pressure that your tank will use in your gun. High
pressure tanks usually output 800 to 850 PSI. Low Pressure tanks
usually output 450 PSI. Preset tanks have a fixed output
pressure from the factory which cannot be adjusted. Both HP and
LP tanks have preset outputs. Adjustable tanks like the
Nitroduck X-stream or the Empire Adjustable don't have a fixed
output pressure and can be adjusted by the player to any output
pressure they need. This article will focus on preset tanks
because you can use adjustable tanks for any gun.
Now is HP or LP right for your gun? There are a few things to
keep in mind when considering this. First, what pressure does
your gun need to cycle and shoot a paintball? (This is called
the operating pressure.) Tippmanns, Spyders and other entry
level guns need 800 PSI or higher to operate, so you would need
an HP tank with these guns to generate enough pressure to allow
the gun to operate. So if you have a gun that needs 800 PSI to
work and you hook up a 400 PSI LP tank to it, you are not
putting in enough pressure to allow the gun to work. This is why
you would need a high pressure tank.
Mid- to higher-end guns typically operate with less than 300 PSI
input pressure and come with a high pressure regulator. High
pressure regulators go inline (in between) the tank and the gun.
These regulators can accept an input pressure of up too 850 PSI
and regulate it down to a user-adjustable setting to meet the
markers' LP needs. LP guns can use LP tanks. Using an LP Tank
with an LP gun will result in better shot consistency over the
chrono because you are not putting as much stress on the inline
high pressure regulator. Having an LP tank with an LP gun will
also prevent or minimize hot shots if your inline regulator
fails. It will minimize the high pressure air spike going into
the gun which will typically cause your velocity to spike up as
well.
So in short, if you have an HP gun or an LP gun with an HP
regulator, you can use an HP tank. LP guns can also use an LP
tank. Some guns, like the Angel Speed 05, come with a built-in,
inline LP regulator so they can only use LP tanks. As technology
advances we are seeing more and more entry level guns becoming
LP, so it's always best to check with the manufacturer of your
marker for their tank recommendations. And never buy a new tank
before you buy a new gun.
GA-0
About the Author
Anthony Sakakeeny founded Sak World Paintball in 1998. Sak World
provides state of the art paintball products online, featuring
guns, barrels, nitrogen tanks and apparel. Visit Sak World
Paintball today at http://www.sakworldpaintb
all.comto purchase new and used paintball equipment and gear
at affordable prices.
|
|
Medline Airone Pressure System with Flaps, Adjustable $109.29 Medline Airone Pressure System with Flaps, Adjustable |
|
|
Fuel Pressure Regulator $105.99 Fuel Pressure Regulator; Adjustable Pressure Regulator; Multiport; |
|
|
Bayou Classic High Pressure Adjustable Regulator With Valve $25.9 This Bayou Classic High Pressure Regulator features 0-30 PSI adjustable regulator with 1/4 inch inlet and outlet. |
|
|
CO2 Adjustable Flow Pressure Regulator $99.99 The first step to a beautiful planted tank is good lighting. The second is providing the proper amount of CO2 for your plants to utilize. Attach this CO2 Pressure Regulator to your own tank of CO2 and you can read the exact pressure and output of CO2 into your tank. Professional construction includes solenoid diaphragm valve with 1.5 meter power cable and bubble counter including micro adjustment needle valve. |
|
|
SSBC Adjustable Proportioning Valve with Pressure Gauge $65.99 Universal application.Polished.Built-in gauge to moniter pressure at all 4 corners.Regulates rear brake pressure |
|
|
Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Adult $22.76 Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Adult |
|
|
Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Infant $22.76 Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Infant |
|
|
Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Large Adult $27.11 Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Large Adult |
|
|
Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Child $22.76 Lumiscope Aneroid Blood Pressure Monitor with Adjustable Gauge, Blue, Child |
|
|
Adjustable Fuel Pressure Regulator by Mr. Gasket $29.99 Adjusts fuel pressure from 1 to 6 lbs. Fits 5/16"3/8"ID. fuel line.Includes fittings.Recommended to be used with the Weber and Interco carburetors as they only require 3.5 lbs. of fuel pressure |
|
|
Powerwasher 81K035SH Pressure Washer Vario Nozzle for Adjustable Spray Pattern $17.99 Pressure Washer Vario Nozzle for Adjustable Spray Pattern - 81K035SH. Adaptors to Fit Most Electric Pressure Washers. (2) Lance Extensions |
|
|
SSBC A0707-1P - Adjustable Proportioning Valve w/Pressure Gauge - SSBC $65.99 Universal application;Polished;Built-in gauge to moniter pressure at all 4 corners;Regulates rear brake pressure SSBC A0707-1P - Adjustable Proportioning Valve w/Pressure Gauge - SSBC |
|
|
Pressure $11.49 Pressure |
|
|
Adjustable Fuel Pressure Regulator by Mr. Gasket - Jeep Performance $29.99 Adjusts fuel pressure from 1 to 6 lb.;5/16 in. 3/8 in. ID. fuel line;Includes fittings;Reco mmended to be used with the Weber and Interco carburetors as they only require 3.5 lb. of fuel pressure Adjustable Fuel Pressure Regulator by Mr. Gasket - Jeep Performance |
|
|
Adjustable Fuel Pressure Regulator by Hesco $201.99 1991-95 YJ Wrangler;1991-95 XJ Cherokee;1991-92 MJ Comanche;1993-95 ZJ Grand Cherokee;2.5L 4-cylinder engine and 4.0L 6-cylinder engine |
|
|
Adjustable Fuel Pressure Regulator by Hesco for Jeep $201.99 1991-95 Jeep YJ Wrangler;1991-95 Jeep XJ Cherokee;1991-92 Jeep MJ Comanche;1993-95 Jeep ZJ Grand Cherokee;2.5L 4-cylinder engine and 4.0L 6-cylinder engine JEEP CHEROKEE (XJ) COMANCHE GRAND CHEROKEE (ZJ) WRANGLER (87-95YJ) 5.9 LIMITED BRIARWOOD COUNTRY ELIMINATOR ISLANDER LAREDO LIMITED ORVIS PIONEER RENEGADE RIO GRANDE S SAHARA SE SPORT TSI 1991 1992 1993 1994 1995 1996 1997 1998 2.5L (150) 4L Power Tech (242) 5.2L Magnum (318) 5.9L Magnum (360) GAS Adjustable Fuel Pressure Regulator by Hesco for Jeep |
|
|
Apexi Fuel Pressure Regulators - Adjustable (Type A) [Universal - Fits all Cars] $157.52 "Stock fuel pressure often does not allow upgraded injectors to perform at maximum efficiency. By upgrading the fuel pressure regulator, the user can adjust the fuel pressure to optimal levels. Upgrading the fuel pressure regulator on factory size injectors will also allow the injectors to perform at an improved level. The easy to use adjustable screw on top of the regulator can accommodate a wide range of tuning necessities." |


US $27.99































































































Comment