Sirsalliyan Small Air Compressor

Rivet Gun

1979-93 Mustang Outer Door Handle & Inner Door Belt Weatherstripping Install

I currently have an 87 coupe in the middle of a 351 swap, so while its down and waiting on a few parts to come in I decided it's finally time to replace the door handles ( 1979-93 Mustang outer door handle kit - part# LRS-22404K) and the 1981-93 Mustang inner door belt Weather strip pair (part# LRS-21456PR). These are two parts that are easily overlooked and often put off, but make a difference when they are replaced.

I opted for the black door handle kit for $19.99, but you may prefer the kit in chrome for $24.99 (1979-93 Mustang Chrome Outer Door Handle Kit w/ Rivets) installation is the same either way.

This is the stock handle unfortunately painted to match the body color. I recommend taping around the door handle before drilling out the old rivets or installing the new ones to protect the paint if the rivet gun or the drill decides to move.

On the stock door panels, you will have two bolts under the armrest pad that are covered by two round plugs and a philips head screw farther up the pull handle that holds the armrest assembly on. Once these are removed, the assembly has two T-shaped tabs holding it in-just pull up and forward and they slide right out. There is a screw on the door handle bezel, one in the speaker grille, and one in the mirror hole cover that have to be removed as well. If your car has manual windows, the plastic cover on the window crank slides to the side and a torx bit holds the handle on.

Once these are removed the door panel is held on by the clips in the back of it. It is easy to slide your hand behind the edges of the panel and gently pull the panel away from the door one clip at a time, but if your door panel is not in very good condition you may want to invest in one of our Mustang door panel removal/installation kits.

The top of the panel lips over the door frame at the base of window, so you have to lift the panel off the door once the clips are out.

Then drill out the rivets and disconnect the rod from the door handle on the inside.

Once the door panels are off, it's a good time to replace the inner door belt weatherstrip, as it only takes a few minutes. We just pulled the factory staples out and used the LRS-21456HDW inner door belt screws to attach the new ones. It's as simple as pulling staples and screwing the new ones in.

Line the new handles up and make sure the rod inside the door is going through the rod retainer on the door handle and rivet the new handles on. The door handle rivets are quite large so if you don't already have one you will need to purchase or borrow a large rivet gun. We sell one that is designed to work with this kit (rivet gun for 1979-93 Mustang outer door handles) or you might be able to find one at your local hardware store. 

It only took a little over an hour to do both sides and was well worth it. For cars Weatherstripping equipped with power windows and locks, there will be a few more things to unhook when pulling the door panels off but should be pretty close.

About the Author

We are Professional Supplier Automobile Parts,Rubbersealing.net supply Weather strip,Weatherstripping,Hood seal,Auto door seal,Glass run channel,Auto seal strip,Auto rubber strip and a series of Automobile Parts Manufacture!

C.R. Laurence DBR9X000XL CRL Replacement Jaws for Marson HD Rivet Gun $27.45 CRL Replacement Jaws for the Marson HD Rivet Gun are packaged in pairs.

Copperfield 59250 Pop Rivet Gun $155.6 Chimney has been filling the supply and accessory needs of over 8 000 chimney sweeps hearth retailers masons and contractors for over 25 years. Chimney has the privilege of serving over 80 of the chimney professionals in America.Founded by Robert Daniels Sooty Bob in 1978 Chimney has grown from a oneman operation to a national network of six warehouses and a manufacturing plant. From its headquarters in Fairfield Iowa Chimney plays a major role in providing for the Chimney industry.Pop Rivet Gun

Rivet Gun known as the Cricket on Construction Site of the Manhattan Building Company $79.99 Arthur Gerlach Rivet Gun known as the Cricket on Construction Site of the Manhattan Building Company - Premium Photographic Print

Marson MA39000 Standard Rivet Gun $44.16 Square shoulder fulcrum pin of coldformed heat treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools. Handles have cushionmolded vinyl grips for comfort. Rivet Size: 3/32 in 1/8 in 5/32 in 3/16 in Body Material: Aluminum Alloy Handle Material: Carbon Steel Includes: 4 Mounted Nosepieces Service Wrench

Air-Hydraulic Power Set Rivet Gun $405.95 The smallest yet most powerful air-reciprocating hydraulic riveter ever made, the AK175A installs steel rivets of up to 1/4 inch diameter with 3,500 lbs. og pulling force. Designed for long life and manufactured to the highest standards of quality, the AK175A is a true breakthrough in air-powered riveting tools. ? Compact, lightweight (28 ounces), and powerful (3,500 pounds of pulling force). ? Full 5/8 inch travel permits installing most rivets in a single cycle. ? Unique jaw system accomidates 1/8'' through 1/4'' rivet sizes by simply changing the nose assembly (no tools required). ? Operates at normal shop air pressures of 90 to 120 psi. ? Patented design. By Huck International.

Great Neck Saw Rivet Gun With 40 Rivets 17720 Pack of 5 $56.1 Rivet gun. Die molded steel plate construction. Hardened and tempered steel. Four interchangeable heads. Ergonomic comfort grip PVC handle. Includes ten 3/32 rivets ten .13 rivets ten 5/32 rivets and ten 3/16 rivets. Includes bonus hand wrench. Carded. Length: 12.9. Width: 1.3. Height: 2.4

Lindemann 601200 Stainless Steel Malco Pop Rivet $164.34 Our commercial Pop Rivet Gun is designed to take a lot of use. Pop rivets are used to attach relining components and many other uses. Maintain your Pop Rivet Gun with WD40 or other similar lubricant. Manufactured to the Highest Quality Available. Design is stylish and innovative. Satisfaction Ensured. Great Gift Idea.

Tool Aid 19800 Quarter Inch Heavy Duty Rivet Gun $47.23 Versatile and easy to use Comfortable handle grips Long handles for greater leverage 2.25 inch nose reach for standard use Lightweight plastic bottle catches rivet stems Nosepieces thread into handles for convenient storage Metal construction and simple design with few moving parts to ensure years of service

Tool Aid TA19400 Plastic Rivet Gun $32.97 Sets most plastic rivets in one stroke without regripping. Long reach design accessed areas not accessible with lever type tools. Sets all sizes using a single nosePieces. One hand operation.

Huck HK175A AirHydraulic Power Set Rivet Gun $516.04 The best tool for big workloads PneuDraulic design produces 3500 lbs of pulling force. Powerfully sets rivets from 0.125 to 0.25 using easytochange nose pieces. Includes blow molded storage case.

Alcoa Fastening Systems HK150A Hydraulic Rivet Gun $337.5 Installs aluminum steel and stainless steel rivets through 1/4 diameter. Up to 3 500 LBS of pulling force with onehanded operation. Sets threaded aluminum inserts from 3mm through 3/8 24 size and steel inserts through 1/4 20 size with optional nutsetter conversion kit (sold separately). Manufactured to the Highest Quality Available. Satisfaction Ensured.

Gun $10 Gun

Huck International Air-Hydraulic Power Set Rivet Gun $393.33 The smallest yet most powerful air-reciprocating hydraulic riveter ever made, the AK175A installs steel rivets of up to 1/4 inch diameter with 3,500 lbs. Og pulling force. Designed for long life and manufactured to the highest standards of quality, the AK175A is a true breakthrough in air-powered riveting tools. Compact, lightweight (28 ounces), and powerful (3,500 pounds of pulling force). Full 5/8 inch travel permits installing most rivets in a single cycle. Unique jaw system accomidates 1/8 inch through 1/4 inch rivet sizes by simply changing the nose assembly (no tools required). Operates at normal shop air pressures of 90 to 120 psi. Patented design.

Huck International HUCAK175A AirHydraulic Power Set Rivet Gun $524.73 The smallest yet most powerful airreciprocating hydraulic riveter ever made the AK175A installs steel rivets of up to 1/4 inch diameter with 3 500 lbs. og pulling force. Designed for long life and manufactured to the highest standards of quality the AK175A is a true breakthrough in airpowered riveting tools. Compact lightweight (28 ounces) and powerful (3 500 pounds of pulling force). Full 5/8 inch travel permits installing most rivets in a single cycle. Unique jaw system accomidates 1/8 through 1/4 rivet sizes by simply changing the nose assembly (no tools required). Operates at normal shop air pressures of 90 to 120 psi. Patented design.

ZAGGskins (Rivet) $19.99 ZAGGskins (Rivet)

Dib Gs Dib Gs Swivel Head Rivet Tool 304522 $13.34 Swivel head rivet tool Steel construction with nonslip- grip Head pivots a full 360 to install rivets at any angle for easy access Spring-loaded handle ejects rivet automatically Sets 3/32?, 1/8?, 5/32?, and 3/16? without changing heads Brand #: dib Imports 304522 UPC: 009326318943 Keywords: rivet gun tool

Rivet's Dog Food $19.99 Rivet's Dog Food - Premium Poster

Rivet Hammer $14.95 Riveting hammer has a chisel-shaped for spreading rivet heads and one end that is flat that is used for to tap the rivet to secure. Square face measures 1/2 head measures 3 in length. Handles are seasoned ash. Made in Germany.

Off- Shoulder Rivet Blouse $22 Off- Shoulder Rivet Blouse - Spicy Holic

Replacement Mat and Rivet Set $12.99 Replacement Mat and Rivet Set for the Fly Moto Stand

530MO Rivet Connecting Link $6.95 Parts Unlimited 530MO Rivet Connecting Link

Rivet-Throwing Contest Held $79.99 Rivet-Throwing Contest Held - Premium Photographic Print

Replacement Rivet Tips $5.06 Motion Pro Replacement Rivet Tips Replacement rivet tips for the Motion Pro Chain Riveting tool

Rc-135 Rivet Joint Reconnaissance $24.99 Stocktrek Images Rc-135 Rivet Joint Reconnaissance - Photographic Print

ERV3 Rivet Connecting Link $10.99 DID ERV3 Rivet Connecting Link ERV3 Rivet Connecting Link by D.I.D Racing Order the matching size link for your chain

Gun Slinger $24.99 Gun Slinger

Padme with Gun $10 Padme with Gun

Gangsta With Gun $10 Gangsta With Gun

Gun Life $10 Gun Life

Machine Gun $10 Machine Gun

The Love Gun $10 The Love Gun

Space Gun $10 Space Gun

Stun Gun $10 Stun Gun