Sirsalliyan Small Air Compressor

Modular Air

Modular Homes the Wave of the Future

Maybe you have seen a portion of a pre-built house moving — hopefully slowly — along a highway to a site that a family will one day call home. It likely was part of a modular home, which offers builders and home buyers advantages about which you should know.

For years, modular homes have been confused with U.S. Department of Housing and Urban Development code homes, also known as “manufactured housing.” Unlike HUD code homes, which have a permanent chassis to allow towing to the home site, modular homes usually comprise several sections assembled on the home site. And like a site-built home, modular homes must meet local code requirements.

A product of systems building, modular homes are constructed on an assembly line in a climate-controlled factory setting. Despite a lingering misperception of factory-built housing as inferior, these homes account for a growing percentage of new construction.

According to a recent study by The Freedonia Group, a Cleveland-based industrial market research firm, the amount of factory- or systems-built housing will grow 1.2% annually through 2005.

Modular homes account for one of every 10 homes built in the Northeast, according to the NAHB’s Building Systems Council. That region ac-counted for 29% of the nation’s modular activity in 2001. The South Atlantic region was a close second with 26%, and the Great Lakes region ranked third at 24%.

The most popular states for modular construction in 2001 were North Carolina, Michigan and New York.

A good many of the homes you see today — perhaps some of your competitors’ — are modular homes. In 2001, modular homes accounted for 3% of all single-family homes constructed, the BSC says. Outside of metropolitan areas, that figure jumped to 11%.

    How They’re Made
  In a highly engineered manufacturing process, modular homes are built in sections called modules. Once built, the modules undergo a series of quality-control checks in the factory.After the manufacturing process is complete — typically with interior finish on the floors, walls and ceilings — trucks transport the home to its site, place the modules on a prepared foundation with a crane and join them to the foundation and each other.While critics have charged that modular homes are too boxy, that refrain is beginning to fade with growing flexibility in design and customization options. Also, the emerging trend of hybrid modular panelized construction — adding site-built garages, porches and other custom add-ons — gives modular housing a fresh face.

     Fast Construction
  Some factories can build modular homes in as little as one to two weeks. The home’s arrival at its site and placement on its permanent foundation can be even more astonishing. In another two to four weeks, a local builder or contractor can connect the utilities and complete the home. “It takes approximately 90 to 120 days for the entire process, from the time the customer places an order until it’s ready for the family to move in,” McLendon says.

    Saving Time and Money
  Modular homes usually cost less per square foot — 5% to 25% less, one manufacturer estimates — than site-built homes, thanks to shorter, more organized and more predictable construction schedules. Aside from cost savings, buyers of modular homes also benefit from the accelerated on-site assembly time. The associated advantages — reduced chance of weather damage or home-site vandalism — make modular construction a smart choice for infill development.

    The Comfort Factor
  Modular homes are “overbuilt” to withstand travel from the factory to the home site, so they often are sturdier and tighter than conventional homes. They also make it easier to insulate areas hard to access in a home constructed with conventional building techniques. Reduced air infiltration and more complete insulation often make modular homes more comfortable than site-built homes while lowering heating and cooling costs.Increasingly, modular construction offers builders a competitive alternative that might be worth a departure from traditional construction methods.

    Contact Building Systems Network for more detailed information at www.buildingsystemsnetwork.com or call them at 770-888-2761

About the Author

Building Systems Network Awards

2003 Excellence in Marketing & Model Home

DESIGN AWARDS – Grant Smereczynsky takes home 3 First Place Awards!

The Building Systems Council presented the 2003 Excellence in Marketing & Model Home Design Awards on November 3, 2003 at the annual convention held in Hot Springs, Virginia at The Homestead.

Grant Smereczynsky, former builder with Cougar and currently CEO/Builder of the Building Systems Network, LLC accepted three first place awards for his contribution and commitment to the Systems Built industry:

Awards received:

Winner – Associate Member Web Site
Winner – NAHB Builder Member Consumer Publication Print Ad
Winner – NAHB Builder Member CD-Rom/DVD
On October 3, 2003, Grant Smereczynsky officially launched The Building Systems Network, LLC

Smereczynsky says, “As a builder, I believe the systems built home is the best built home in the industry. Period. I’m continuing to market and promote the systems built industry to the homebuyer in a clean, consistent and easy to use manner. Our tagline indicates that “construction is improved through technology” and that is the message we want to promote to site builders and to the homebuyer”.

Antec LanBoy Air Modular Case $331.81 LanBoy Air Blue

Miglia Modular Helmet $99.99 AGV Miglia Modular Helmet The AGV Miglia Modular Helmet has an I.M.A.C shell (Impact Modified Alloy Composite) with improved properties for shock absorption Double curvature, scratch-resistant and anti-fog face shield True in-helmet air flow with chin and top vents along with rear extractors Removable and washable Coolmax liner One-hand opening system Quick-release buckle (one finger operation) Removable breath deflector and chin curtain DOT certified **Closeouts are limited to stock on hand**

Multitec Modular Helmet $434.69 Shoei Multitec Modular Helmet The Multi-Tec Helmet from Shoei is a significant system helmet redesigned! The flip-up face cover and shell join to form an aerodynamic streamline shape that provides all the protection of a full-face helmet with the convenience of an open face model. Features: Sculpted Aerodynamic "Bag-Molded" Fiberglass Shell is designed to minimize wind noise and drag Advanced Integrated Matrix Plus(AIM+) shell Single-button release allows chin bar/face shield to be opened with one hand Central locking mechanism can easily be operated with either hand Upper "Air-Scoop" ensures maximum air intake and excellent aerodynamics Lower vent directs airflow upward across the inside of the face shield reducing fogging and turbulence Removable interior cheek pads and chin strap cover Interior design reduces wind noise and provides a comfortable fit Communication system compatible Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal and eliminates side covers for a flush, quiet fit 3-Dimensionally curved face shield for optical clarity Scratch-resistant coating Adjustable Base Plates ensure an "Air-Tight" fit 100% protection from harmful UV A&B Rays One-piece injection-molded for consistent fit Optional (CF-1V) racing shield with tear-off posts View the MotorcycleUSA.com review of the Shoei Multitec Modular Helmet here: Shoei Multitec Modular Helmet Review **Note: Shoei products can only be shipped to U.S. customers

Neotec Modular Helmet $584.09 Shoei Neotec Modular Helmet With the popularity of sport and adventure touring at an all-time high, the advancement of the incredibly versatile modular helmet segment was a must for SHOEI engineers. Though still a respected part of?it's 2012 helmet lineup, the Multitec's modular design was used as a backbone, analyzed with scrupulous eyes, and tweaked ever so slightly to yield the most progressive flip-up helmet on the market today-the all-new Neotec. Boasting improved shell aerodynamics, a wider and taller field of vision, a reduction in wind noise, an internal sun shield, and a fully removable, washable and replaceable liner system, the Neotec is the next level of modular helmet design for today's hybrid motorcyclists. Features: Meets or exceeds DOT standards Weight is approx. 1780 grams (medium-sized helmet) Flip-up chin bar & face shield State-of-the-art shell forming technology incorporates the aerodynamic advantages of a spoiler right into the shell Vortex Generator on the chin bar works to reduce noise and manage air flow around the helmet Proven 360 degree Pivot Locking System, made of high quality stainless steel components, ensures a safe and secure closure Enlarged single-button release allows chin bar/face shield for ease of use with riding gloves Opening the chin bar up will automatically close the face shield if it is open? 3 Shell sizes and five liners present increased fit options that help to comfortably fit most head sizes from XS through XXL Built-in?QSV-1 sun shield gives riders instant relief from sun glare in one quick motion Distortion-free shield blocks 99% of harmful UV rays Forehead area of the outer shell is raised slightly to accommodate the internal sun shield, helping allow for the integrity of the inner EPS liner to remain intact The?CNS-1, three-dimensionally curved shield is both wider and taller than the?previous CX-1V shield it replaces Pinlock anti-fog shield & lens system (included) Dual-Ridge window bead increases contact with the shield to reduce wind noise Scratch-resistant shield coating A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop it open to increase airflow Fully removable 3D Max-Dry interior liner which quickly dissipates moisture within the helmet interior Interchangeable cheekpads to customize comfort & fit Eyeglass compatible interior is optimized for many different sizes of eyeglasses, while still minimizing gaps that can cause excess interior noise Channeled dual-layer EPS liner enhances impact absorption and ventilation Large lower vent shutter for ease of use with riding gloves optimizes air flow in the riding position Strategically-placed, three-position upper vent increases air intake, making it easier for?touring riders behind a windscreen to get air flow Upper exhaust vents are uniquely positioned to take better advantage of negative air pressure to create cool air intake and warm air exhaust

KM-320MAH 22 Stainless Steel Modular Ice Maker with Crescent Cubes and 115V Air Cooled $2299 The 325 lb Air-Cooled Modular Crescent Cuber KM-320MAH is an incredibly durable and advanced modular ice machine from Hoshizaki It features a stainless steel evaporator and produces up to 325 pounds of ice per day which makes it perfect for establish...

KM-515MAH 22 Stainless Steel Modular Ice Maker with Crescent Cubes and 115V Air Cooled $2377 The 501 lb Air-Cooled Modular Crescent Cuber KM-515MAH is an incredibly durable and advanced modular ice machine from Hoshizaki It features a stainless steel evaporator and produces up to 501 pounds of ice per day which makes it perfect for establish...

KML-631MAH 30 Stainless Steel Modular Ice Maker with Crescent Cubes and 208V Air Cooled $2779 The 575 lb Air-Cooled Modular Crescent Cuber KML-631MAH is a remarkably advanced and durable modular ice machine from Hoshizaki It produces up to 575 pounds of ice per day which is perfect for establishments with low to typical ice needs Helping to c...

KML-451MAH 30 Stainless Steel Modular Ice Maker with Half Sized Crescent Cubes and 115V Air Cooled $2459 The 401 lb Air-Cooled Modular Crescent Cuber KML-451MAH is a remarkably advanced and efficient modular ice machine from Hoshizaki It produces up to 401 pounds of ice per day which is perfect for establishments and applications that dont require and d...

GM54S Modular Street Helmet $161.99 GMAX GM54S Modular Street Helmet The new modular design allows the "flip-jaw" to rotate further back on the crown of the helmet. The further rotation of the flip-jaw not only increases the user's line-of-sight when in the raised position, but it also lessens the user's fatigue by maintaining an even distribution of weight across the helmet. New inner flip tint sun lens Inner flip shield is easily raised of lowered with a lever located on the exterior of the helmet Distortion free clear single lens shield New integrated multi-function red L.E.D rear light Optional rear brake light kit available One hand easy to use chin bar push to open mechanism Lightweight D.O.T approved thermo-plastic alloy shell Excellent shield sealing reduces unwanted air and noise GMAX "D.E.V.S" adjustable "dual exhaust venting system", top, side, and rear venting reduces fogging and sweating by allowing hot air to escape from the mouth area and top of head Adjustable chin vent directs air upward across the inside of the shield to help reduce or eliminate fogging Large eye port for improved range of vision Coolmax comfort liner and cheek pads move the moisture away from your body and the fabric dries quickly. The added performance keeps you dry and comfortable Removable/washable interior and adjustable cheek pads allow for more comfortable sizing Deluxe ear pockets for better fit and comfort Built in speaker pockets for communication systems Soft padded chin strap Painted shell with high quality clear coat finish Soft helmet bag included

N103 Solid Modular Helmet $149.99 Nolan N103 Solid Modular Helmet Ready for N-COM communication system Aerodynamic polycarbonate shell with built-in spoiler for improved stability Pivoting chin bar with elliptical trajectory movement and stainless-steel latching mechanism Safety dual-action Centromatic release system Internal Sunscreen - short dark shield mounted on inside of the shell and moving independently from the clear shield with external operation Fully removable and machine washable interior on snaps and tabs with extra neck roll for wind-noise reduction Easier to open Jet Stream Wing? top vent and independently operated chinbar vents with rear air extraction system Optically correct, tool-less quick-change Lexan? face shield, protected from UVA and UVB offering UV 400 protection Multi-position anti-scratch shield accepts NFR antifog insert (included) Chin curtain included Microlock? (adjustable quick release) retention system Sanitized Clima Comfort antimicrobial hypoallergenic inteior Velour chin strap padding DOT certified

Antec Lanboy air Blue Black / Blue Computer Modular Case $179.99 Meet the LanBoy Air. Nearly every part on this case, even the motherboard and PSU mounts, is modular and customizable. Up to 15 exhaust fans create positive air pressure inside the case that blows dust and heat out through panel perforations. Up front, the LanBoy Air's AirMounts HDD mounting system literally suspends drives in mid-air for unsurpassable vibration and noise resistance. Along with its two internal 2.5" SSD bays and With Power Supply: No Power Supply Mounted: Bottom External 5.25" Drive Bays: 3 External 3.5" Drive Bays: No Internal 3.5" Drive Bays: 6 Internal 2.5" Drive Bays: 2 x internal bottom-mounted 2.5" SSD bay Front Ports: 1 x USB 3.0 2 x USB 2.0 Audio (AC'97 and HDA compatible) In and Out Side Air duct: No

Anchor Brand - Modular TIG Torch Kits $419.5 Economical welding supplies. Cable is 25 feet long Runs on 150.00 A amps Welding supplies includes an air cooled torch package, 5 modular torch heads, 2 torch bodies with and without valve and more

KMD-450MAH 30 Stainless Steel Modular Ice Maker with Crescent Cubes and 115V Air Cooled $2470 The 457 lb Air-Cooled Modular Crescent Cuber KMD-450MAH from Hoshizaki is a narrow profile ice machine made especially for use with dispensers It produces up to 457 pounds of ice per day which is ideal for dispensers that receive typical use Helping ...

KMD-850MAH 30 Stainless Steel Modular Ice Maker with Crescent Cubes and 208V Air Cooled $3422 The 786 lb Air-Cooled Modular Crescent Cuber KMD-850MAH from Hoshizaki is a narrow profile ice machine made especially for use with dispensers It produces up to 786 pounds of ice per day which is ideal for dispensers that require above average ice pr...

KMD-901MAH 42 Stainless Steel Modular Ice Maker with Crescent Cubes and 208V Air Cooled $4122 The890 lb Air-Cooled Modular Crescent Cuber KMD-901MAH from Hoshizaki is a narrow profile ice machine made especially for use with dispensers Ideal for dispensers that require above average ice production it produces up to a remarkable 890 pounds of ...

AIRAID Modular Intake Tube 300-928 $60.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 200-919 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-965 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 400-940 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 200-983 $120.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 400-966 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 200-912 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 400-941 $126.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 200-996 $126.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 510-934 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-924-1 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 310-970 $121.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-925-1 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 310-927 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-944 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-943 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?

AIRAID Modular Intake Tube 300-917 $109.99 AIRAID Modular Intake Tubes (MIT) help straighten and improve clean air flow to the engine for more added horsepower, torque and fuel efficiency AIRAID MIT?s are custom-made to fit each specific vehicle and are compatible with stock intakes as well as all other AIRAID Intake Systems. All of our AIRAID MIT?s are made from the highest quality of cross-linked, high-density polyethylene, which lasts a lifetime and comes with our ?No-Hassle? Warranty. All of our AIRAID MIT?s come with our, very easy to read installer-friendly installation instructions that do not require any cutting, drilling, or aftermarket tuning.?