Sirsalliyan Small Air Compressor

Lubricator Air

Top 7 Compressed Air Energy Saving Tips

Would you like to reduce electrical costs related to your compressed air system? More than likely- you can.  Start by determining your annual compressed air electrical costs by using this formula:  

Brake Horse Power X 0.746 X Annual Hours of Operation X KWH Cost
                              (divided by) Motor Efficiency

NOTE:
1 CFM @ 100 PSIG FOR 8760 HOURS COST $110.00 PER YEAR IN ELECTRIAL COST

Next…follow these
Top 7 Compressed Air Energy Saving Tips: 

1.    Fix your Air Leaks
If you do nothing else – follow this one tip:  Find and fix your compressed air leaks. Air leaks are industry's "biggest looser"! 
The average plant looses 20% to 30% it its compressed air through multiple small air leaks.  The money spent on man power and parts to find and fix these leaks is well worth it. Note ( ¼ inch  hole will flow 103 cfm @ 100 psig)

2.    Change to Synthetic Lubricants
If you are using petroleum based lubricants, you could experience up to an 8% energy savings by switching to Compressor Synthetic Lubricants.  Plus extend equipment life and save on oil changes and disposal cost.

3.    Reduce Plant Operating Pressure
If possible – reduce overall plant pressure.  Less pressure > Less CFM used > less energy consumed.

TIP:  Reduce plant pressure 2 pounds at a time, then test run for minimum 24 hours. If any equipment has issues…then increase pressure 2 pounds until running smoothly again.  For every 2 pound pressure reduction -you save 1% of the electrical cost to run the air compressor.

4.    Check Differential Pressure on Air Compressor Filters.
Start at the compressor cabinet filter then check the compressor inlet filter. 

Note: A dirty inlet filter can cost you 1% to 3 % in additional electrical costs.  Why? Because decreased air flow to the compressor inlet valve increases the compression ratios resulting in more run time.
Next check the air/oil separator differential pressure under a full load.  A new separator causes a differential pressure drop of approximately 2-3 psig.  When your pressure drop reaches 8-10 psig, then it's time to change your separator elements.  A dirty separator element can cost you up to 5% in additional electrical cost.

Next change the control air filter element. This often over looked, but still important filter where  the controls receive their air signal. A pressure drop here causes the controls to receive the lower pressure signal loading the compressor more and using more electricity. 

5.    Reduce the Compressor Inlet Temperature
By reducing inlet air temperature 10°F below 70°F, you save 2% on electrical usage. Your benefit increases up to 8% on a 30°F degree day.  But increasing the inlet temperature 10°F above 70°F will cost you 2% in additional electrical usage for every 10°F up to 10% at 120°F. (Inlet temperature has very little affect on Lubricated screw compressors)

6.    Check Differential Pressure on Compressed Air Line Filters.
Size Compressed Air Filters to be twice (2x) your compressor CFM flow rate. This will lower your pressure drop approximately 2-3 psig and save 1% on energy costs. Elements will last twice (2x) as long and you will save on maintenance costs.

7.    Know what quality of compressed air your plant needs.
The cleaner & dryer the compressed air the more energy used. 
Check with the manufacture of your equipment to determine the quality of air needed.

 View the Air Quality Classifications ISO 8573.1 2001

About the Author

Tommy McGuire
Owner of McGuire Air Compressors, Inc. "Real People with Real Air Compressor Experience"
Tommy McGuire has owned McGuire Air Compressors, located in a 10,000 square foot facility in the heart of Piedmont NC, since 1981. His knowledge of air compressor systems & related equipment is extensive.
www.industrialaircompressors.biz

Pneumatic Lubricator $68.51 High Quality Content by WIKIPEDIA articles The pneumatic lubricator is a device which injects an aerosolized stream of oil into the airline. This is used to provide lubrication for internal working parts of pneumatic tools and components such as actuating cylinders, valves and motors. Pneumatics is that branch of technology, which deals with the study and application of use of pressurized gas to affect mechanical motion. Pneumatic power is used in industry, where factory machines are commonly plumbed for compressed air; other compressed inert gases can also be used. Pneumatics also has applications in dentistry, construction, mining, and other areas. A compressed fluid (also called a subcooled fluid) is a fluid under thermodynamic conditions that force it to be a steam. In a plot comparing absolute pressure and specific volume (commonly called a Pv diagram), of a real gas, a compressed fluid is to the left of the liquidvapor phase boundary; that is, it will be to the left of the vapor dome. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 88 Publication Date: 2010/08/30 Language: English Dimensions: 6.00 x 9.02 x 0.21 inches

Plews lubrimatic Plews lubrimatic 1 4 innpt Lubricator 24-501 $41.51 1/4?npt lubricator Compact 1/4? NPTF 18 SCFM rated flow 5 oz. polycarbonate bowl May be filled while system is under pressure Transparent sight dome 7.4 overall height Maximum operating pressure 150 P.S.I. at 125 F. Operating temperature range -10 F. to +175 F. For pressures up to 250 P.S.I., metal replacement must be used 1 per box Brand #: Plews/Lubrimatic 24-501 UPC: 028893245018 Keywords: lubricator comprssr air line

Campbell Hausfeld MP2680 In-Line Lubricator $15.99 In-Line Lubricator - MP2680

Emerson's Patent Axel Lubricator $19.99 Emerson's Patent Axel Lubricator - Premium Poster

Astro Pneumatic AST2616 Filter/Regulator and Lubricator with Gauge $105.28 Features and Benefits: Prevents costly damage to air tools caused by rust scale and moisture Convenient minimum installation time into your compressed air system Gauge has rugged polycarbonate case with 2 face 3/8 NPT with 0160PSI gaugeProvides clean dry regulated compressed air over a wide range of air flows with accurate control and fast response.

Coilhose Pneumatics 16525 1/4" Lubricator. Each $43.18 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 4 oz Bowl Material = Polycarbonate Inl

Coilhose Pneumatics 16581 1/2" Lubricator. Each $48.04 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 8 oz Bowl Material = Polycarbonate Inl

Astro Pneumatic Filter/Regulator And Lubricator w/Gauge. Each $72.93 Manufacturer: Astro Pneumatic. Each. Features Benefits: Prevents costly damage to air tools caused by rust, scale and moisture Convenient minimum installation time into your compressed air system Provides clean, dry, regulated compressed air over a wid

Coilhose Pneumatics 1/2" Lubricator w/Bowl Guard. Each $53.47 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Bowl guard Capacity Volume = 8 oz Bowl Material = Polyca

Coilhose Pneumatics 16616 3/4" lubricator w/Bowl Guard. Each $88.45 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 23 oz Bowl Material = Polycarbonate In

Mechanical Lubricator, AT&SF #3751 from the Railroad Series $19.99 Gordon Osmundson Mechanical Lubricator, AT&SF #3751 from the Railroad Series - Photographic Print

Milton 1/2 NPT Precision Lubricator. Each $54.12 Manufacturer: Milton Industries. Each. Features and Benefits: Sight glass dome on drop type allows observation for instant drip rate adjustment Tamper proof Lubricator may be filled without shutting down line pressure Oil supply tube check valve guarante

Coilhose Pneumatics 1668843R Heavy Duty Lubricator $68.76 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication. Bowl guard. Capacity Vol: 4 oz. Bowl Material: Polycarbonate. Inlet Size: 3/8 (NPT). Operating Pressure: 150.0 psi [Max]. Height: 7 . Diameter: 3 . Body Material: Die Cast Aluminum. Type: Lubricator.

Coilhose Pneumatics 1668844 Heavy Duty Lubricator $67.95 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication. Capacity Vol: 8 oz. Bowl Material: Polycarbonate. Inlet Size: 1/2 (NPT). Operating Pressure: 150.0 psi [Max]. Height: 8 . Diameter: 31/2 . Body Material: Die Cast Aluminum. Type: Lubricator.

Coilhose Pneumatics 1668842 Heavy Duty Lubricator $61.49 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication. Capacity Vol: 4 oz. Bowl Material: Polycarbonate. Inlet Size: 1/4 (NPT). Operating Pressure: 150.0 psi [Max]. Height: 7 . Diameter: 3 . Body Material: Die Cast Aluminum. Type: Lubricator.

Milton In-Line Lubricator. Each $18.38 Manufacturer: Milton Industries. Each. Features and Benefits: To lubricate pneumatic tools for full protection by accurately metering correct amount of oil 1/2 oz. capacity 1/4" male NPT x 1/4" female NPT Customers also search for: Discount Milton Indus

602208 - 1/2 inch Lubricator $85.71 [438-602208] 3.1 LB

24-501 - Cmpct Airline Lubricator $54.98 [6547129] Truck Delivery UPC: 028893245018 9.5L x 3.25W x 3.25H 0.93 LB 0.06 Cubes

B1741-A - Lubricator W/3 Springs $52.8 [025-B1741-A] 0.31 LB

Buyenlarge 225106P2030 Emersons Patent Axel Lubricator 20x30 poster $30.55 Series: Industrial America Invention. Artist: Unknown. Period:. Source country: USA. Source Year: 1883. Oiling the equipment prevents breakdowns from wear and tear. This automatic lubricator solves many of these future disasters. 20inch by 30 inch poster print on standard paper. All files are stored digitally and are ready for reproduction. The quality is closely monitored to ensure professional results. This item takes 59 businessdays to ship

Emersonamp;apos;s Patent Axel Lubricator 28x42 Giclee On Canvas $428.79 Series: Industrial America InventionArtist: UnknownPeriod: Source country: USASource Year: 1883Oiling the equipment prevents breakdowns from wear and tear. This automatic lubricator solves many of these future disasters.28 inch by 42 inch Giclee print on Canvas.All files are stored digitally and are ready for reproduction. The quality is closely monitored to ensure professional results.This item is custom made per order.

Emersonamp;apos;s Patent Axel Lubricator 12x18 Giclee On Canvas $77.63 Series: Industrial America InventionArtist: UnknownPeriod: Source country: USASource Year: 1883Oiling the equipment prevents breakdowns from wear and tear. This automatic lubricator solves many of these future disasters.12 inch by 18 inch Giclee print on Canvas.All files are stored digitally and are ready for reproduction. The quality is closely monitored to ensure professional results.This item is custom made per order.

Model 5040A Rim Clamp Tire Changer - Air Drive $4295 ? Wheel Capability: Steel, many alloys, and some performance applications. ? Tool Head Offset Adjustment: Spring assisted lift, manual set back, and lock. ? Shape of Tabletop: ?X? shaped for rigid perimeter support of the wheel. ? Wheel Clamping Method: Four self-centering clamps in tabletop actuated by pneumatic cylinder. ? Bead Loosening System: Foot control actuates cylinder that handles wheels up to 10.5? wide. ? Drive System (Electric 5040E): 110v, 15A, single phase; 110 to 175 PSI, 2 HP compressor, 5 SCFM at 150 PSI. ? Required Air Source (Air Drive 5040A): 110 to 175 PSI, 5 HP compressor, 14 to 15 SCFM at 150 PSI. ? Pressure Limiter: Standard ? Bead Seating Reservoir: 3.4 gal. tank, pressure protected. ? Inflation Gauge: Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant Lexan faceplate. ? Filter Lubricator Standard with automatic drain and large capacity lubricator bowl. ? Clamping Range: 10? - 21? External, 12? - 24? Internal. ? Maximum Tire Width: 10.5 inches. ? Maximum Tire Diameter: 50 inches. ? Chassis Footprint: 35? wide x 44? deep x 70? high. ? Shipping Weight: 585 lbs. By Coats.

Dxvpl400 - Lubricator 3/4 In-Line 3.7 Oz $92.74 [8862088] UPC: 811016010408 6.25L x 3.5W x 3.5H 2 LB 0.04 Cubes

Coilhose Pneumatics 1668846 Heavy Duty Lubricator $125.11 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication

Air $10 Air

8844M - 1/2 inch Lubricator W/Metalbowl W/Sightglas $72.31 [166-8844M] UPC: 02929216602 3.1 LB

In The Air $10 In The Air - Mac Miller