Sirsalliyan Small Air Compressor

Inch Reversible Compressor

Inventing A Selective Asparagus Harvester

For the last week or so I have been trying to do some life cycle testing on the pneumatic cylinders that we are going to use for the next asparagus harvesting machine we build. The cylinders should be able to do about a million strokes before the need to be replaced.

The machine has a row of pneumatic cylinders, or often referred to as air cylinders, arrayed across the asparagus bed. As the machine moves forward a sensing system locates the spears and tells the air cylinder lined up with the spear when to cut.

The cut signal causes the piston rod to extend from the cylinder at high speed with about 18 inches of stroke. It takes less than a tenth of a second for the cylinder to extend to full stroke. On the end of the piston rod is mounted a blade that cuts the spear.

I set up a fixture out in my garage for testing the cylinder. I’ve got it mounted to a frame similar to how it will be mounted on the asparagus harvester, pointed down at the ground at around 45 degrees.

I filled an asparagus crate or lug box, lined with plastic, full of dirt from the back yard. I placed the crate of dirt so that when the cylinder is extended the blade goes about two inches deep into the soil.

I actually went to the grocery store and bought a bunch of asparagus to test the cutting ability of my blades. I wanted to see if I could detect a difference between a blade with a V notch in it, a slanted edge like a guillotine, and an arrowhead type blade.

I tamped the soil down till it was nice and firm, and then used a dowel to make a hole just big enough to get an asparagus spear into. Then I pushed a spear into the hole and tamped the dirt down around it. I lined up three spears so the blade would contact the first spear while in mid-air, the second spear right at ground level, and the third spear would have the cut line about an inch below ground.

I tried this with all three blade types, and I could find no difference at all in the cutting ability or anything else. The blades sliced through all three spears like they were made of butter. There was no deflection or twisting of the blade, so my new secret method of preventing blade rotation seems to work well.

Since revealing details about an invention online would compromise my patent rights I can’t go into details about the new method I am using to prevent the blades from rotating out of position.

I would like to do the life testing at 150 psi, but my compressor only goes between 120 psi and 135psi as it cycles. So I set the air pressure for the testing at 120 psi.

I’m interested in the life of the seals, and whether the piston rod ends up breaking due to metal fatigue. The load placed on the end of the piston rod by the blade and guiding assembly is offset from the center of the piston rod.

On the down stroke the pneumatic valve reverses the direction of the air to the cylinder before the cylinder reaches the physical end of its stroke to prevent damaging the cylinder. On the return stroke the piston hits the rod end of a smaller cylinder screwed into the rear head of the cutting cylinder to act as a spring and absorb the shock loads.

My compressor can just barely keep up with the cylinder if I fire the cylinder every 20 seconds. It’s going to take a long time to get anywhere near a million strokes. I need a much bigger compressor.

To cycle the cylinder I used a 12f675 micro controller chip, an 8 pin chip with a microprocessor, memory, and various interface modules like analog to digital converters, comparators, and counters all included. Even an accurate clock is built in. Learning to program and use these microcontroller chips should be in every inventor’s toolbox.

I programmed the chip using a basic language. I used a breadboard, a couple of pots and a voltage regulator etc along with the chip to create an automatic cycling controller. It has two pots. One pot controls the time between firings and the other determines the length of the pulse sent to the air valve. The longer the pulse the longer the stroke produced by the air cylinder.

I’ve tested a whole lot of air cylinders with this method and I’ve yet to find one that would even go 10,000 cycles without developing a problem. I think this time I’ve got an air cylinder that will hold up for that million strokes I need.

These new cylinders I’m using have a 1” diameter bore. The cylinders I’ve used previous had a 1-1/2 inch bore. There is a big difference. The smaller surface area of the piston means the force is much smaller. The acceleration is determined by the force, and the new cylinder is much more sensitive to variations in pressure. That is something that the asparagus harvester invention will have to address.

In a future article I will describe in some detail the pressure problems and the special electronic air pressure regulation system I intend to use for the machine.

About the Author

New Products, Ideas, Inventions: Help with Invention Marketing

 

Invention help for small inventors: Asparagus Harvester Invention

 

Inventions, patents, and online marketing: Developing A Marketing Plan - New Invention

1/4 Inch Pressure Gauge Air Filter Regulator Compressor#OT852 $6.07 Air Filter Regulator Compressor 1/4 Inch Pressure Gauge

Silentaire Scorpion I Compressor $418.11 This Silentaire scorpion I compressor features an automatic shutoff feature that reduces noise, and minimizes motor wear. This compressor includes a trap and filter that eliminates moisture buildup in the air hose.Piston: Single pistonPressure: Up to 30 pounds per square inchAir flow: 0.55 cubic feet per minute at maximum pounds per square inchMeasurements: 8 inches x 8.75 inches x 6 inchesIncludes: Coiled plastic air hose

Silentaire Scorpion II Compressor $498.91 This Silentaire Scorpion II compressor features an automatic shutoff feature which reduces noise, and minimizes motor wear. This compressor also features a trap and filter, which eliminates moisture buildup in the hose.Measures: 9.5 inches x 9.5 inches x 4.5 inchesIncludes: Coiled plastic air hose, and airbrush holder with table clampPistons: Double pistonCapability: Up to 55 pounds per square inch

Hy. Air Compressor Kit 3 gal. $115.99 Hyundai Air Compressor Kit 3 gal., 1/3HP, 100PSI, 2900 RPM impact wrench & ratchet kit, 1/2" impart srench, 2/8" reversible air drill, orbital sander, die grinder, cut-off tool

KD Tools KDT3450 Coil Spring Compressor for up to 55/8 Inch Springs $127.78 3450Coil Spring Compressor Features and Benefits: Use tool to remove and install automotive coil springs up to 5 5/8 Inch outside diameter Designed to grasp a spring with a maximum 3/4 Inch wire diameter Can be used on straight or curved springs Forged alloy steel arms hug contour of helix

17 Inch Round Slab-Reversible $119.5 Reversible finger slots end grain won t dull knives oil finish

K-D Tools Reversible Combination GearWrench - 1/2 Inch $25.99 Reversible with the flip of a lever

K-D Tools Reversible Combination GearWrench - 9/16 Inch $27.16 Reversible with the flip of a lever

K-D Tools Reversible Combination GearWrench - 3/4 Inch $33.24 Reversible with the flip of a lever

Table top, 24 x 24 Inch Reversible $18.45 The MissionRS Mfg. QQTT24X24 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT24R Reversible Table Top is a 24 inch x 24 inch square top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT24X24 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table top, 24 x 42 Inch Reversible $31.95 The MissionRS Mfg. QQTT24X42 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT24X42 Reversible Table Top is a 24 inch x 42 Inch rectangle top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT24X42 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table Top, 30 x 30 Inch Reversible $25.95 The MissionRS Mfg. QQTT30X30 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT30X30 Reversible Table Top is a 30 inch x 30 inch square top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT30X30 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table top, 30 x 48 Inch Reversible $39.95 The MissionRS Mfg. QQTT30X48 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT30X48 Reversible Table Top is a 30 inch x 48 inch rectangle top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT30X48 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table Top, 36 x 36 Inch Reversible $36.95 The MissionRS Mfg. QQTT36X36 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT36X36 Reversible Table Top is a 36 inch x 36 inch square top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT36X36 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table top, 30 x 42 Inch Reversible $35.45 The MissionRS Mfg. QQTT30X42 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT30X42 Reversible Table Top is a 30 inch x 42 inch rectangle top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT30X42 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table top, 24 x 30 Inch Reversible $24.77 The MissionRS Mfg. QQTT24X30 Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT24X30 Reversible Table Top is a 24 inch x 30 Inch rectangle top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT24X30 Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

KD Tools KDT2284 Piston Ring Compressor 21/8 to 6 Inch $28.15 Features and Benefits:Use to install pistons 21/8 Inch to 6 Inch (54mm to 127mm) in diameterPositive lock action provides positive compression and fingertip releaseSlip tool over piston and tighten with Lshaped wrench to compress piston ring into piston grooves. Insert piston into cylinder and tap with hammer handle to install. Enlarged crimped edge prevents compressor from entering cylinder.

The Reversible Carver $37 Catskill s gourmet collection offers a wide range of chopping blocks for every occasion. Blocks include special features such as rounded corners, deep blended juice grooves, wooden ball feet with rubber pads, and laminated domestic hardwood in a variety of grain patterns for durability, toughness beauty. All have oiled finishes. The reversible carver - model 1336 features 19 inch x 15 inch x 1 inch our reversible carver without feet. Use grooved side for juicy cuts - use reverse plain side for general use.

Table top, 24 Inch Round, Reversible $18.45 The MissionRS Mfg. QQTT24R Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT24R Reversible Table Top is a 24 inch round top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT24R Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table top, 30 Inch Round, Reversible $25.95 The MissionRS Mfg. QQTT30R Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT30R Reversible Table Top is a 30 inch round top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT30R Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Table Top, 36 Inch Round Reversible $36.95 The MissionRS Mfg. QQTT36R Reversible Table Top will look great no matter whether you have the walnut or oak wood side presented. The MissionRS Mfg. QQTT36R Reversible Table Top is a 36 inch round top with reversible sides and a black rubber edge. The MissionRS Mfg. QQTT36R Reversible Table Top is the perfect fit for any full service dinning provider and its quality appearance is sure to impress your guests.

Reversible Sequin 5.75 Inch Mary Jane $84.5 Glitz and glamour rule your wardrobe and our must have Reversible Sequin 5.75 Inch Mary Jane is the perfect addition to your already shining shoe selection. This sexy pump features a 5.75 inch stiletto heel and 1.75 inch concealed platform with detachable shaft and adjustable arch strap.

Lisle 2 1/8 Inch - 5 Inch Ring Compressor $22.75 Spring clutch eliminates ratchet problems. Spring clutch assures a proper fit on the piston and a positive locking action. Range 2 1/8 inch to 5 inch.

Lisle LIS21700 3 to 5 Inch Wrinkle Band Ring Compressor $32.76 Features and Benefits: Wrinkle band cuts friction in half. Rings slide in easily Rings slide in easily CAM operated set adjustment screw just once for entire set of pistons Insert a full set of pistons in half the time with half the work Wrinkle band can t slip down into the cylinderWrinkle band ring compressor is 4 ways better low friction wrinkle band CAM operated and faster. When installing pistons back into the cylinder bore nothing works better than the right piston ring compressor. Eliminates risk of breaking piston rings and piston ring lands.

HandStands 02043 Reversible Laptop Sleeve 10 Inch $26.65 Safely carry your laptop with a neoprene 17 inch or 10 inch reversible sleeve case. This sleeve will protect your laptop from bumps shock and scratches. This case is made with durable weather resistant neoprene that cushions and protects your computer. This laptop sleeve incorporates a lightweight design for easy mobility. This laptop sleeve is reversible giving you two distinct colors in one great case. The compact design of the laptop case allows you to safely transport your laptop in any briefcase messenger bag or backpack.

D.W. Fearn Vt-7 Stereo Compressor $4800 The D.W. Fearn VT-7 Stereo Compressor has an all Class-A vacuum tube audio path, like all Fearn audio products. The gain reduction elements utilize circuitry that duplicates the sound and characteristics of the finest classic vacuum tube compressors, without depending on tubes that are no longer manufactured. The control circuitry is modern solid-state analog. The two channels may be used independently or linked together for stereo. A built in sidechain high-pass filter may be selected to reduce the compression on bass-heavy material. Controls (each channel): Threshold Gain Attack Release Harder/Softer Separate/Link/Link HPF The VU meters may be switched between indicating gain reduction or output level. The VT-7 Compressor has a highly transparent sound, although it can be used more aggressively when needed. Artifacts of the compression process are substantially lower than in most other compressors. The two channels may be used independently, or linked for stereo. In addition, a third position on the Link switch inserts a high-pass filter (HPF) in the sidechain to reduce the gain-reduction sensitivity of the VT-7 to low frequencies. This is a gentle roll-off, nominally at 100Hz. This allows a bass-heavy mix to have a better frequency balance, and prevents heavy low-frequency audio from modulating the audio level. The VT-7 is equally adept in tracking as well as a bus compressor. Even jazz and classical tracks can be sent through the VT-7 for some mild gain control without obvious effect other than a significant improvement in the overall sound of the mix. Design Philosophy Like all D.W. Fearn products, the VT-7 stereo compressor is a no-compromise design. From the quarter-inch thick front panel painted with the finest polyurethane finishes to the choice of all components and controls, the VT-7 is built to look as great as it sounds. Fearn build products that last, so they use parts with superior durability and longevity. Fearn products are hand-built by craftsman, one at a time, in the USA. Important Note: Having many tubes, the VT-7 generates a considerable amount of heat. We highly recommend using D.W. Fearn Vented Rack Panels (#180296) above and below the unit for proper cooling. History of the VT-7 Compression Amplifier Compression (or limiting) is sometimes seen as a necessary evil in the recording process. Often it is used to compensate for less than optimum performance or recording technique. However, when used appropriately, there is no question that good-sounding compression can add loudness, power, and improved impact to a recording. Over many years of recording, I have had the opportunity to use and sometimes own some of the best compressors in the world. For the D.W. Fearn line of products, a compressor was obviously important. I began the search for the ultimate compressor design in 1995 and it wasn't until 2004 that I developed the sound I was looking for. There are several ways to achieve compression, and all ha

45 Inch Deluxe Reversible Satin Cape - Capes and Robes $17.32 This 45 Inch Deluxe Reversible Satin Cape is perfect for a Vampire Costume, or a Devil Costume!

Radial Engineering Komit Compressor Limiter $499.99 The Radial Komit Compressor Limiter is one of the eight modules designed to be comprise the Radial Workhorse Rack and Mixer System that combines the popular 500 series platform with an incredibly flexible patching system to let you create the ultimate studio environment. The Radial Komit is a feature-rich compressor-limiter that simplifies the process of dynamic manipulation while expanding upon creative tone shaping. At one end is a super-clean compressor that delivers amazing results with single knob control. At the other, an old-school diode bridge clipping limiter goes from 'vintage to nasty'. But don't let the minimalist approach deter; the Komit provides exceptional flexibility by integrating a series of automatic functions that are both musical and intuitive.The design begins with an auto-detecting feed-forward VCA that reads the incoming program material and reacts 'real-time' to the time constant. Set the 3-position attack-decay switch to slow for vocals, medium for instruments and fast for percussion. As you increase the ratio, the Komit FlexKnee compression dynamically adjusts the pivot point, seamlessly transitioning from soft to hard knee for more natural results. Yet unlike most limiters that are designed to be transparent, the Komit Clipper is designed to introduce personality to your recordings. The Clipper simulates the sound created by old-school diode bridge circuits from the early days of radio. These clip the input signal when they exceed the headroom. Same deal only here, you are in complete control. Ten settings are graduated from mild harmonic overload to extreme nasty. Think of Nine Inch Nails.To ensure absolute signal integrity, full size discrete electronics are employed throughout while the vintage style Hammond broadcast transformers add extra warmth to the signal path. A variable level control provides gain make-up or can be used to drive the Clipper for added distortion. Dual ballistic VU metering makes it easy to simultaneously view compression and output when making adjustments. Designed for use with all 500 series racks, the Komit can be linked for full stereo operation. When used with the Radial Workhorse, the Omniport is assigned as a key input for frequency dependent compression, de-essing, ducking or any number of dynamic manipulation effects.Applications:Channel StripThe Komit is the ideal compressor to compliment a 'gold' channel strip. Feed the mic into a PowerPre, an EQ and the Komit can keep dynamics under control for more professional results. Stereo programThe Komit can be set to stereo mode by linking two Komits together. This is great for mastering. And even though the two units will share the same time constant, independent compression retains the full stereo image. DuckingUse the key input (via the Omniport on the Workhorse) to automatically duck a guitar track (lower the level) when the vocalist begins to sing. Simply connect the TRS output from the PowerPre into the Omniport key input.Single dial

Lisle LIS21500 7 to 10 Inch Piston Ring Compressor $54.54 Features and Benefits: The Lisle spring clutch assures a proper fit on the piston and a positive locking action Range: 7 to 10 Height: 7 When installing pistons back into the cylinder bore nothing works better than the right piston ring compressor. Eliminates risk of breaking piston rings and piston ring lands. Lisle s spring clutch eliminates any ratchet problems.

Lisle LIS19000 21/8 to 5 Inch Take Apart Ring Compressor $33.63 Features and Benefits: The 19000 combines Lisle spring clutch with takeapart feature necessary for Volkswagens motorcycles outboard motors etc Quick release makes it easy to remove from connecting rod Can be used on conventional engines with narrow ring spacing Range 2 1/8 to 5 . (54127mm)19000 takeapart ring compressor brought to you by Lisle gives more accessibility.

Lisle LIS21000 31/2 to 7 Inch Piston Ring Compressor $48.44 Features and Benefits: The Lisle spring clutch assures a proper fit on the piston and a positive locking action Range: 31/2 to 7 Height: 7 Packaged in a box Shipping weight: 1 lb. 11 oz.When installing pistons back into the cylinder bore nothing works better than the right piston ring compressor. Eliminates risk of breaking piston rings and piston ring lands. Lisle s spring clutch eliminates any ratchet problems.