Sirsalliyan Small Air Compressor

Hammer Kit

Step By Step Instruction in How To Bricking, Bricklayers Tool Kit,

Bricklayers Tool Kit

The bricklayer's tool kit must be used with great care and properly maintained, firstly, because of the safety aspect arid secondly, because the tools can be of great expense.
When purchasing tools, consideration must be taken on how often the tools will be used. With every day use, the tools have to be made to be able to withstand the work. Often this is not the case with less expensive tools.
Below is a list of the tools, how they should be used and properly maintained:

Brick Trowel
These came various sizes and shape ranging between ten and fourteen inches. One side of the trowel has a more rounded edge, this being for rough cutting, however, this use is not advised for the beginner. The measurements are the actual blade size, the width of trowel also varies and beginners will find a narrower trowel easier to use. The rounded side on the trowel makes it suitable for both left and right handed operators. When the trowel is not in use for a period of time, clean it off dry and apply a light coat of oil to avoid rusting.

Pointing Trowel
A smaller version of the brick trowel but with both edges being straight, these are used for certain types of pointing or to add a finish to the brick work and should be maintained as the Brick trowel.

Spirit Level
This will be the most expensive part of the tool kit, thus keeping the bricklayers work level (horizontal) and plumb (vertical). These also come in various sizes. The main size for everyday work is nine hundred millimetres or twelve hundred millimetres.

Boat Level
Like the Spirit Level above, it has two bubbles, (one for levelling, the other for plumbing) but is smaller. It is very
handy for decorative panels and soldier courses.

Line and Pins
These are used when corners of the building have to be built to run in the bricks between. The pins are tapered at the ends to allow for inserting into joints. It is important that the line is kept free of knots and clean of mortar.

Corner Blocks
These are used in pairs as an easy method of holding the line up. These are inexpensive as you can make your own.

Tingle Plate
Another less expansive tool but of great use. II is used for holding the line up over long lengths of walling to remove any sagging.

Club (or lump) Hammer
Used with either a bolster or chisel. It is essential that the head is secure and checked regularly to ensure it never comes loose.
Always wear eye protection goggles.

Bolster
Used for cutting bricks. Eye protection must be used at all times it is used. The end should never be allowed to burr over. This is known as a mushroom and can splinter when being hit. The end should be kept free from mushrooms by a grinding wheel which also allows the culling edge to be kept sharp.

Cold Chisel
Similar to a bolster but with a smaller blade, used more for cutting into brickwork after it has been laid (cheap furniture)e.g. for letting in services. Again maintenance and safely procedures should be followed the same as for the bolster.

Hawk
A small hawk is used when pointing a lot, and makes it easier to hold the mortar.(furniture stores)

Gauge Rod
Inexpensive as you make it yourself. A length of timber with the vertical spacing of the bricks marked along one edge. Used when working from both ends of a wall to ensure that the courses are equal.

Brick Bat Gauge
Another inexpensive tool which is able to be made. Easy to use when a lot of cutting is required and maintains a regular size to the cuts. The one illustrated is made for the three most basic cuts used. Half bat, three quarter bat and closer.

Brick Hammer and Comb Hammer
Two similar types of hammer, one with a fixed head, the other with detachable blades. (coffee tables) When the teeth have worn down, the blades can be renewed. They can be used for a number of jobs:

i. tidying the edges of cuts to leave a clean edge
ii. for what is known as chasing, i.e. letting cables into walls before plastering

Again, safety is of the utmost importance. Goggles must be worn at all limes and hands and fingers must be kept clear.

Steel Tape
The types most commonly used by bricklayers these days. Very convenient size and is easily transported via the belt or pocket. When used in wet conditions it must be wiped after use to prevent rusting.

Jointing Tools
Used for putting a finish to the joints in brick work. A half-round joint which is also known as a bucket handle finish. Two types are shown, these can now be bought from shops but an old pail or bucket handle can be bent to a suitable shape.

About the Author

Grisoft / Hammer Drill/Driver Kit / LHD-216 $408.18 Grisoft - Hammer Drill/Driver Kit - LHD-216

Greenlee 21.6V Lithium Ion Electrician's Hammer Drill/Driver $810.75 Hammer Drill/Driver Kit

Foam Hammer $12.99 Bang it out and party like a cave man when you add this Foam Hammer to your pre-historic tool kit. Great for a barbarian costume

DEWALT D25551K 1-9/16-in Spline Rotary Hammer Kit $519.99 1-9/16" Spline Rotary Hammer Kit - D25551K. 360° Side Handle. Depth Rod. Kit Box

DEWALT D25223K 1-in SDS Rotary Hammer Kit $249.99 1-in SDS Rotary Hammer Kit - D25223K. 360° Side Handle. Depth Rod. Kit Box

Bosch 11304K Brute Breaker Hammer Kit with Cart $1599.99 Brute Breaker Hammer Kit w/ Cart - 11304K. Breaker Hammer - 11304. (2) Moil Points - HS2161. (2) Narrow Chisels - HS2163. Hammer Hauler - T1657

Bosch 11304KD Brute Breaker Hammer Kit with Premium Hammer Hauler $1499.99 Brute Breaker Hammer Kit - 11304KD. Hammer Hauler Cart - T1757. Quick-Release Strap. (2) Star Point Chisels - HS2861. (2) Narrow Chisels - HS2163

Slide Hammer Puller Kit $150.95 ? This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: ? Shallow Flange ? Deep Flange ? Slide Hammer ? 2 Way Yoke ? 3 Way Yoke ? Center Bolt and Cone ? 3 Pc. Adapter Set ? Leg Package with ScrewsBy K-D Tools.

Ingersoll Rand Hammer Repair Kit. Each $82.73 Manufacturer: Ingersoll Rand. Each. Sets & Kits do not have warranty/ see individual pcs for details Customers also search for: Discount Hammer Repair Kit , Buy Hammer Repair Kit , Wholesale Hammer Repair Kit , 663023017228, 2135-THK1, Pneumatic Tool Repa

DEWALT DWH052K Demolition Hammer Dust Extractor Attachment Kit $89.99 Demolition Hammer Dust Extractor Attachment Kit - DWH052K. Mounting Bracket and Strap

DEWALT D25890K 15.0 AMP SDS-max Demolition Hammer Kit $739.99 15.0 AMP SDS-max Demolition Hammer Kit - D25890K

DEWALT D25330K 1-in SDS-plus Compact Chipping Hammer Kit $279.99 1-in SDS-plus Compact Chipping Hammer Kit - D25330K

Pocket Hammer MultiTool Kit $14.99 ">Kit contains 10 tools including screwdrivers, saw, pliers, file and more.> > >"

Makita HP1641K 5/8-in Hammer Drill Kit $94.99 5/8-in Hammer Drill Kit - HP1641K. Keyless Drill Chuck (194073-4). Plastic Case (824877-7). Side Handle (153503-4). Depth Gauge (324219-0)

Factory Reconditioned DEWALT D25850KR 11.5 AMP Spline Demolition Hammer Kit $329.99 11.5 AMP Spline Demolition Hammer Kit - D25850KR. Side Handle. Bit Grease. Kit Box

DEWALT D25900K 14.0 AMP SDS-max Demolition Hammer Kit $939.99 14.0 AMP SDS-max Demolition Hammer Kit - D25900K. 360° Adjustable Side Handle. Kit Box

DEWALT D25553K 1-9/16-in Spline Combination Rotary Hammer Kit $449.99 1-9/16-in Spline Combination Rotary Hammer Kit - D25553K. 360° Side Handle. Depth Rod. Kit Box

DEWALT D25323K 1-in Heavy Duty SDS Rotary Hammer Kit $279.99 1-in Heavy Duty SDS Rotary Hammer Kit - D25323K. 360° Side Handle. Depth Rod. Kit Box

DEWALT D25404K 1-1/8-in SDS-plus Rotary Hammer Kit $349.99 1-1/8" SDS-plus Rotary Hammer Kit - D25404K. 360° Side Handle. Depth Rod. Kit Box

Factory Reconditioned DEWALT D25404KR 1-1/8-in SDS-plus Rotary Hammer Kit $289.99 1-1/8" SDS-plus Rotary Hammer Kit - D25404KR. 360° Side Handle. Depth Rod. Kit Box

DEWALT D25012K 7/8-in Compact SDS Rotary Hammer Kit $159.99 7/8-in Compact SDS Rotary Hammer Kit - D25012K. 360° Side Handle. Depth Rod. Kit Box

Factory Reconditioned DEWALT D25600KR 1-3/4-in SDS-max Rotary Hammer Kit $434.79 1-3/4" SDS-max Rotary Hammer Kit - D25600KR. 360° Side Handle. Depth Rod. Kit Box

Ingersoll Rand Hammer Tune Up Kit for 2115. Each $71.67 Manufacturer: Ingersoll Rand. Each. Sets & Kits do not have warranty/ see individual pcs for details Customers also search for: Discount Hammer Tune Up Kit for 2115, Buy Hammer Tune Up Kit for 2115, Wholesale Hammer Tune Up Kit for 2115, 663023018676, 211