Sirsalliyan Small Air Compressor

Framing Nailer

Power tools

Ever heard the saying ‘women want babies, men want power tools!'
- it's true. Most men would trade their remote controls just to
have the coolest and most technologically advanced power tools
there are in the market. in fact, I know of one man who would
instantly trade his car in just to have the Bosch 1" SDS-plus
BullDog Xtreme Rotary Hammer. BullDog Xtreme seems to have
stolen the limelight from many other equally cool power tools
from other power tool manufacturers. Even brands under the same
power tool manufacturer dimmed in light of the launching of
BullDog Xtreme.

Not to mention, some men happen to think that the Dewalt DW723
Miter Saw and the power tool stand are the best creation of man
ever since beer was invented! A power tool like the Dewalt DW723
needs a sturdy stand that is versatile, stable and complete.

If you're looking for a power tool like a drill that will fit
into little nooks and crannies, let us tell you that the
Panasonic 15.6 Volt drill/driver has been receiving rave reviews
from the consumers. The batteries for this power tool can last a
remarkably long time. The motor for this power tool is so
versatile that it packs up to 390 inch-pounds of torque. It's
hard to find another power tool to match that, frankly speaking.

Speaking of drilling, for power tools addicts, you've just got
to get the Paslode 900420X IM350-CT Impulse Cordless Framing
Nailer. The Contractor's Performance Pack comes with extra
batteries, tools for charging the nailer in your car, 2 fuel
cells, lube oil, degreaser cleaner and safety goggles too. This
power tool pack is truly going to make your experience a very
convenient one. Setting the power tool up is a no brainer and on
top of that, this powerful power tool is extremely light -
weighing in at only 6.9 lbs. This power tool has an indicator
light so that you'll know when the battery is running low. The
cycle rate rate is about 2 to 3 nails per second. Top
performance power tool! With the Constructor's Performance Pack,
you don't have to worry about running out of power because you
can charge the power tool's battery up and when one battery runs
out, you can just stick the extra battery into the power tool
and just keep on going.

For power tool lovers, you'll also love the Makita 6347DQDE
18-Volt Cordless Driver-Drill kit. This power tool kit comes is
a 2-speed driller that is as versatile as it comes. This power
tool comes with 2-batteries (no extra charge), Phillips/slotted
bit, charger and an Pack-and-Carry case. This power tool comes
with 2 18-Volt Ni-MH batteries, therefore, you can expect a
longer run time with this power tool. This power tool also comes
with Industrial ½" keyless chuck with easy replacement of
brushes.

Have fun with your power tools!

Dakota Caudilla, journalist, and website builder Dakota Caudilla
lives in Texas. He is the owner and co-editor of
http://www.really-cool-tools.com on which you will find a
longer, more detailed version of this article.

About the Author

Dakota Caudilla, journalist, and website builder Dakota Caudilla
lives in Texas. He is the owner and co-editor of
http://www.travel-and-play.com on which you will find a longer,
more detailed version of this article.

Bostitch N80CB-1 15 Degree 3-1/4-in Coil Framing Nailer $289.99 Coil Framing Nailer - N80CB

Factory Reconditioned Bostitch U/N80CB-1 15 Degree 3-1/4-in Coil Framing Nailer $189.99 Coil Framing Nailer - U/N80CB

Bostitch F28WW 28 Degree 3-1/2-in Industrial Framing Nailer System $229.99 Wire Weld Framing Nailer - F28WW

Bostitch F21PL2 21 Degree 3-1/2-in Framing and Metal Connector Nailer $209.99 21 Degree Lightweight Magnesium Framing Nailer - F21PL2

Bostitch N89C-1 3-1/2-in High-Power Coil Framing Nailer $289.99 High-Power Coil Framing Nailer - N89C

Factory Reconditioned Bostitch U/F28WW 28 Degree 3-1/2-in Industrial Framing Nailer System $159.99 Wire Weld Framing Nailer - U/F28WW

Bostitch LPF21PL 21 Degree 3-1/4-in Low Profile Framing Nailer $229.99 21 Degree 3-1/4-in Low Profile Framing Nailer - LPF21PL

Bostitch MCN250S 35 Degree 2-1/2-in Metal Connector Framing Nailer (Short Magazine) $339.99 Strapshot Metal Connector Framing Nailer - MCN250S

Factory Reconditioned Bostitch U/F21PL 21 Degree 3-1/2-in Framing and Metal Connector Nailer $169.99 Plastic Collated Framing / Metal Connector Nailer - U/F21PL

DEWALT D51850 20 Degree 3-1/2-in Full Round Head Framing Nailer $279.99 20 Degree 3-1/2-in Full Round Head Framing Nailer - D51850. Safety Glasses. Replacement Bump Trigger

Bosch SN350-20F 20 Degree 3-1/2-in Full Head Framing Strip Nailer $279.99 20 Degree 3-1/2-in Full Head Framing Strip Nailer - SN350-20F. Safety Glasses. No Mar Tip

Bosch SN350-34C 34 Degree 3-1/2-in Clipped Head Framing Strip Nailer $279.99 34 Degree 3-1/2-in Clipped Head Framing Strip Nailer - SN350-34C. Safety Glasses. No Mar Tip

Bostitch GF28WW 7.2V Cordless 28 Degree 3-1/2-in Framing Nailer $279.99 28 Degree Cordless Framing Nailer - GF28WW. 7.2V 1.4 Ah Ni-Cd Battery - 9B12072R. Charger. Carry Case

Bostitch F33PT 33 Degree 3-1/2-in Paper Tape Framing Nailer $239.99 Paper Tape Framing / Metal Connector Nailer - F33PT. (2) Quick Change Nosepieces

Hitachi NR90AEPR 21 Degree 3-1/2-in Full Round Head Framing Nailer $169.99 21 Degree 3-1/2-in Full Round Head Framing Nailer - NR90AEPR. Safety Glasses - 875769

Bostitch F21PL 21 Degree 3-1/2-in Framing and Metal Connector Nailer $209.99 Plastic Collated Framing / Metal Connector Nailer - F21PL. (2) Quick Change Nosepieces

Hitachi NR90ADPR 35 Degree 3-1/2-in Clipped Head Framing Nailer $169.99 35 Degree 3-1/2-in Clipped Head Framing Nailer - NR90ADPR. Safety Glasses - 875769

Senco Senco Ch Gas Framing Nailer 5F0001N $363.54 Ch gas framing nailer The GT90CH cordless clipped head gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer Drives smooth and ring shank nails For truss building, framing, subflooring, sheathing, and decks Other applications include crate and box assembly, pallet making, and fencing Great for any application where cordless convenience would be a benefit Tool weight: 8.0 lb Uses 34 degree strip 70 nail capacity Battery: 6V NiMH Fuel cell: Senco 40G or other compatible fuel Fires 34 clipped head nails, 2? to 3-1/2?, .113 to .131 diameter nails Includes: NiMH battery, charger, service tools, and plastic Brand #: Senco 5F0001N UPC: 741474061271 Keywords: cordless framing nailer clipped head

Senco Senco Frh Gas Framing Nailer 5G0001N $363.54 Frh gas framing nailer The GT90FRH cordless full round head gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer Drives smooth and ring shank nails For truss building, framing, subflooring, sheathing, and decks Other applications include crate and box assembly, pallet making, and fencing Great for any application where cordless convenience would be a benefit Tool weight: 8.0 lb Uses 20 degree strip 32 nail capacity Battery: 6V NiMH Fuel cell: Senco 40G or other compatible fuel Fires 2? to 3-1/2?, .113 to .131 diameter nails Includes: NiMH battery, charger, service tools, and plastic case Brand #: Senco 5G0001N UPC: 741474061264 Keywords: nailer cordless framing full rnd head

Dewalt Dewalt Frh Framing Nailer D51844 $268.92 Frh framing nailer Lightweight magnesium housing and magazine provides power for laminated beams Impact-resistant exhaust cap Permanent molded grip Quick release jam clearing Trigger lock off Tool free depth adjustment Applications include: Framing, subflooring, siding, deck construction, and many others Tool weight: 8.1 lb Accepts a true round head framing nail ranging from 2 to 3-1/2 20 angle magazine Operating air pressure: 70 to 100 P.S.I 7.6 lb Brand #: Dewalt D51844 UPC: 028877461939 Keywords: nailer pneumatic full round head hea

Dewalt Dewalt Clp Head Framing Nailer D51822 $268.92 Clp head framing nailer Lightweight magnesium housing and magazine provides power for laminated beams Impact-resistant exhaust cap Permanent molded grip Quick release jam clearing Trigger lock off Tool free depth adjustment 31 angled magazine holds 80 angled nails Accepts lengths from 2 to 3-1/2 (.113 to .131 diameter range) Ideal for framing, subflooring, wall sheathing, and roof decking Air pressure: 70 to 100 P.S.I Tool weight: 7-1/2 lb Brand #: Dewalt D51822 UPC: 028877461922 Keywords: pneumatic nailer clipped head

Factory Reconditioned Ridgid ZRR350CHD 30 - 34 Degree 3-1/2-in Clipped Head Framing Nailer $149.99 30 - 34 Degree 3-1/2-in Clipped Head Framing Nailer - ZRR350CHD