Sirsalliyan Small Air Compressor

Filter Regulator Lubricator

Tips To Reduce Compressed Air System Pressure Drops

Ask a Question:
What causes pressure drops in my compressed air system and how can I reduce them?

Answer:
Pressure drop can become a compressed air system problem that steals production time and money.

What causes pressure drops?  Any type of obstruction, restriction, or roughness in the system will cause resistance to air flow and cause pressure drop.
In the distribution system, the highest pressure drops usually are found at the points-of-use, including undersized or leaking hoses, tubes, disconnects, filters, regulators and lubricators (FRLs).

On the supply side of the system, air/lubricant separators, aftercoolers, moisture separators, dryers and filters can be the main items causing significant pressure drops. The maximum pressure drop from the supply side to the points-of-use will occur when the compressed air flow rate and temperature are highest.

Your Compressed Air System components should be selected based upon these conditions and the manufacturer of each component should be requested to supply pressure drop information under these conditions.

When selecting filters, remember that they will get dirty. Dirt loading characteristics are also important selection criteria. Large end users who purchase substantial quantities of components should work with their suppliers to ensure that products meet the desired specifications for differential pressure and other characteristics.
The distribution piping system often is diagnosed as having excess pressure drop because a point-of-use pressure regulator cannot sustain the required downstream pressure. If such a regulator is set at 85 psig and the regulator and/or the upstream filter has a pressure drop of 20 psi, the system upstream of the filter and regulator would have to maintain at least 105 psig. The 20 psi pressure drop may be blamed on the system piping rather than on the components at fault. The correct diagnosis requires pressure measurements at different points in the system to identify the component(s) causing the excess pressure drop. In this case, the filter element should be replaced or the filter regulator size needs to be increased, not the piping.

Tips to Reduce Pressure Drop: 

Properly design the distribution system.

-Minimizing pressure drop requires a "systems approach" in design and maintenance of the system.
-Air treatment components, such as aftercoolers, moisture separators, dryers, and filters, should be selected with the lowest possible pressure drop at specified maximum operating conditions.
-When installed, the recommended maintenance procedures should be followed and documented.

 Reduce the effective distance of the flow for air to travel through the system.

-Just like water in a garden hose --the longer the hose, the less water pressure at the end. It works the same with air.
-The pressure loss between the compressor and the end user tool comes from friction in the pipe. The smaller the pipe, the greater the friction, and the longer the pipe, the greater the friction.
If you have both of these issues in the same systems...you may have substantial pressure drops.

Reduce the friction and restrictions.

-Pressure loss is caused by the friction of the air mass flowing on the side walls of the pipe or hose.
The larger the pipe, the more air it will carry in the center, not causing friction loss on the inside walls.
-A smooth inner lining of the pipe or hose will cause less pressure drop.
-A rough inner lining of the pipe or hose will cause more pressure drop. Pipe corrosion can cause friction and pressure loss.
-Couplings, fittings and valves increase the pressure drop.
-Make sure you have the most efficient system layout possible. You may need to relocate some equipment or re-pipe, but if you are suffering from excessive pressure drops, then the benefit may outweigh the cost.

Reduce the velocity, or flow rate, of air through the system.

-For a given pipe or hose size and length, the pressure loss increases as the volume of air flow increases.
-Reducing and controlling the system pressure downstream of the primary receiver can result in a 10% or more reduction in energy consumption...even though the compressors discharge pressure had not been changed. Reducing your system pressure can help improve system performance, reducing leakage rates, and helping reduce stress on operating equipment. Note that a reduced system operating pressure may require modifications to other components, such as pressure regulators, filters, and the size and location of compressed air storage. 

Be sure to consider the effects of all your compressed air system's components on pressure.

-Operate and maintain air filtering and drying equipment to reduce the effects of moisture, such as pipe corrosion.
-Select aftercoolers, separators, dryers and filters having the lowest possible pressure drop for the rated conditions. It's important to check if manufacturers are including pressure drops in filters, pressure regulators, and hoses in their pressure requirements for end-use equipment, or if those pressure requirements given are for afer those components.
-The typical pressure differential for a filter, pressure regulator, and hose is 7 psid, but it might be higher if the system is poorly maintained or designed.
-Specify pressure regulators, lubricators, hoses, and connections having the best performance characteristics at the lowest pressure differential. These components must be sized based upon the actual rate of flow and not the average rate of flow.

 

*SOURCES: "Improving Compressed Air System Performance: A Sourcebook for Industry" - a cooperative effort of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) Best Practices and the Compressed Air Challenge®; "Energy Savings in Compressed Air" by Hank Van Ormer.

 

About the Author

Tommy McGuire Owner of McGuire Air Compressors, Inc "Real People with Real Air Compressor Experience" compressors@mcguire.bizwww.industrialaircompressors.biz Tommy McGuire has owned McGuire Air Compressors, located in a 10,000 square foot facility in the heart of Piedmont NC, since 1981. His knowledge of air compressor systems & related equipment is extensive.

Astro Pneumatic AST2616 Filter/Regulator and Lubricator with Gauge $105.28 Features and Benefits: Prevents costly damage to air tools caused by rust scale and moisture Convenient minimum installation time into your compressed air system Gauge has rugged polycarbonate case with 2 face 3/8 NPT with 0160PSI gaugeProvides clean dry regulated compressed air over a wide range of air flows with accurate control and fast response.

Astro Pneumatic Filter/Regulator And Lubricator w/Gauge. Each $72.93 Manufacturer: Astro Pneumatic. Each. Features Benefits: Prevents costly damage to air tools caused by rust, scale and moisture Convenient minimum installation time into your compressed air system Provides clean, dry, regulated compressed air over a wid

Campbell Hausfeld MP2680 In-Line Lubricator $15.99 In-Line Lubricator - MP2680

MotorGuard Regulator / Filter. Each $117.69 Manufacturer: MotorGuard. Each. Features Benefits: An ultimate air pressure stabilizer, coupled with a world class water separator, this filter / regulator control system is unsurpassed in construction and performance All features contained in one stre

Emerson's Patent Axel Lubricator $19.99 Emerson's Patent Axel Lubricator - Premium Poster

Milton Ind incom Milton Ind incom 1 4npt Mini Regulator S1145 $25.44 1/4npt mini regulator 1/4? NPT mini regulator for use with Milton 1/4? filters Brand #: Milton Ind/INCOM S1145 UPC: 030937011459 Keywords: mini regulator lubricator

Fuel Filter and Regulator by Chrysler for Jeep $85.99 1999-01 Jeep WJ Grand Cherokee JEEP GRAND CHEROKEE (WJ) LAREDO LIMITED 1999 2000 2001 4.7L Power-Tech (285) 4L Power Tech (242) GAS Fuel Filter and Regulator by Chrysler for Jeep

1/4 Inch Pressure Gauge Air Filter Regulator Compressor#OT852 $6.07 Air Filter Regulator Compressor 1/4 Inch Pressure Gauge

Air Regulator, Filter and Gauge for Air Compressors regulator, filter, and gauge $59.52 Essential for optimizing the performance of both airbrush and compressor, this combo unit has a 0-60 psi air gauge, a filter to remove any potential moisture particles, and an automatic locking regulator. It?s recommended for use on diaphragm compressors and non-oil lubricated compressors with tanks.

Western Enterprises - Regulator Inlet Nipples $2.8 Super secure regulator inlet nipples. Brass regulator and flowmeter parts are safe for a variety of gasses Recommended regulator for medical mixtures Filter included for added safety

Motor Guard JLMAC4535 Regulator / Filter $169.24 JLMAC4535 Ultimate Air Control Filter / Regulator Features and Benefits: An ultimate air pressure stabilizer coupled with a world class water separator this filter / regulator control system is unsurpassed in construction and performance All features contained in one streamlined compact rugged housing A must for every airline drop this pointofuse package features a 5 micron water and particulate separator filter supplying clean dry air to a true diaphragm regulator The exclusive microseat design of this regulator provides constant high volume pressure without the fluctuations found in most other regulators The output is adjustable with a rugged T handle control supplying 0 to 125 PSI of precision regulated air for use in prep stations and all shop air requirements Connections are 1/2 NPT supplying 100 CFM of clean dry regulated air Water is accumulated in the large corrosion resistant bowl design and displayed from the ball float site glass Periodic flushing is accomplished with the exclusive nonclogging manual drain port The easy access quickturn bowl allows fast element and replacement

Milton 1142S 1/4 Mini Piggyback Filter Regulator $71.27 NPT filter/regulator piggyback. Ideal for use inconfined areas and low flow applications. Relieving typeregulator adjusts for 0125 PSI 20 micron screw in minifilter. Pre assemble with 0160 PSI Gauge.

Pneumatic Lubricator $68.51 High Quality Content by WIKIPEDIA articles The pneumatic lubricator is a device which injects an aerosolized stream of oil into the airline. This is used to provide lubrication for internal working parts of pneumatic tools and components such as actuating cylinders, valves and motors. Pneumatics is that branch of technology, which deals with the study and application of use of pressurized gas to affect mechanical motion. Pneumatic power is used in industry, where factory machines are commonly plumbed for compressed air; other compressed inert gases can also be used. Pneumatics also has applications in dentistry, construction, mining, and other areas. A compressed fluid (also called a subcooled fluid) is a fluid under thermodynamic conditions that force it to be a steam. In a plot comparing absolute pressure and specific volume (commonly called a Pv diagram), of a real gas, a compressed fluid is to the left of the liquidvapor phase boundary; that is, it will be to the left of the vapor dome. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 88 Publication Date: 2010/08/30 Language: English Dimensions: 6.00 x 9.02 x 0.21 inches

Sharpe 120CFM / 50CFM 1/2" let Air Filter / Regulator. Each $202.44 Manufacturer: Sharpe Manufacturing. Each. Air Control Units. Air Control Unit, 120 CFM Filter Capacity 160 psi Customers also search for: Discount 120CFM / 50CFM 1/2" let Air Filter / Regulator, Buy 120CFM / 50CFM 1/2" let Air Filter / Regulator, Wholes

Devilbiss DV130042 Airline Filter And Regulator $243.83 Tornado action separator ring removes water by swirling incoming air. Flex drain allows fast removal of water collected in the bowl. Quick release bowl guard and spinoff filter element provides quick oneminute filter changes. Quick

Fuel Filter and Regulator by Chrysler $85.99 1999-01 WJ Grand Cherokee

Sharpe Manufacturing SHA6730 120CFM / 50CFM 1/2in. Inlet Air Filter / Regulator $271.83 Effective at removing water oil and contamination to protect air cylinders and air tools. Contains 18C3R regulator with a 160 lb. inverted gauge and air cock. Regulated outlet and filtered main line outlet with 200 lb. gauge included. 5 micron filtration. Filter capacity: 120 cfm; regulator capacity: 50 cfm.

Mechanical Lubricator, AT&SF #3751 from the Railroad Series $19.99 Gordon Osmundson Mechanical Lubricator, AT&SF #3751 from the Railroad Series - Photographic Print

Milton Piggyback Mini-Filter Regulator Duo 1/4'' NPT $68.95 ? Ideal for use in compact air flow applications? Filter/regulator duo has same features as mini regulator plus the space saving convenience of 20 micron screw in mini filter? Comes pre-assembled with 0-160 PSI gage (#1189)Specifications:? Height: 6-1/4''? Maximum SCFM: 20? Relieving type? Maximum pressure: 150 PSI? Temperatures: 40? F to 120? F? Adjusts 0-125 PSI

Fuel Filter and Regulator by Crown Automotive for Jeep $80.99 1997-03 Jeep TJ Wrangler with 2.5L 4-cylinder;1997-01 Jeep XJ Cherokee with 2.5L or 4.0L engines;1997-98 Jeep ZJ Grand Cherokee with 4.0L, 5.2L or 5.9L engines;Sold individually JEEP CHEROKEE (XJ) GRAND CHEROKEE (WJ) GRAND CHEROKEE (ZJ) WRANGLER (97-06LJ) WRANGLER (97-06TJ) 5.9 LIMITED COUNTRY LAREDO LIMITED ORVIS OVERLAND RUBICON SAHARA SE SPECIAL EDITION SPORT TSI UNLIMITED X 1997 1998 1999 2000 2001 2002 2003 2004 2.4L Power-Tech (148) 2.5L (150) 4.7L Power-Tech (285) 4.7L Power-Tech HO (285) 4L Power Tech (242) 5.2L Magnum (318) 5.9L Magnum (360) GAS Fuel Filter and Regulator by Crown Automotive for Jeep

Campbellhausfeld Mini Regulator MP514803AV $36.83 Regulator

Arrow Pneumatic PneuMasterAir 1/2 Filter/Regulator With Gauge. Each $86.85 Manufacturer: Arrow Pneumatic. Each. Features and Benefits: Saves space Cleanable, reusable sintered bronze element Output performance equal to individual filter and regulator Metal bowl with sight glass Includes gauge This space saving unit feature a 40

MotorGuard Economical Low Profile Air Control Unit Regulator/Filter. Each $104.91 Manufacturer: MotorGuard. Each. Features Benefits: A compact, high flow regulator / filter for point of use air control _ in. 100 CFM Site glass T-handle with manual drain Designed for every Ail line drop in the shop Customers also search for: Discoun

Plews lubrimatic Plews lubrimatic Mini Filter Regulator 24-243 $41.69 Mini filter regulator Mini Gives accurate pressure regulation with maximum water and dirt separation Increases life of expensive air-powered tools Solid piston resists rupture, cracking, or tearing under pressure or high cycle rates Maximum operating pressures: 150 P.S.I. at 125 F. primary, 2 to 125 P.S.I. secondary. Operating temperature range: -10 F. to +175 F. Includes filter element and a pressure gauge Port size: 1/4? NPTF Manual drain 5 micron element Bowl capacity - 1 oz Overall height: 8-1/2? 1 per box Brand #: Plews/Lubrimatic 24-243 UPC: 028893242437 Keywords: air compressor filter regulator mini

Fuel Filter and Regulator by Crown Automotive $80.99 1997-03 TJ Wrangler with 2.5L 4-cylinder;1997-01 XJ Cherokee with 2.5L or 4.0L engines;1997-98 ZJ Grand Cherokee with 4.0L, 5.2L or 5.9L engines;Sold individually

Regulator $13.38 12v Regulator. Markings: M0507T09-1 Length: 42mm Width: 57mm Height: 20mm

Milton 1/2 NPT Precision Lubricator. Each $54.12 Manufacturer: Milton Industries. Each. Features and Benefits: Sight glass dome on drop type allows observation for instant drip rate adjustment Tamper proof Lubricator may be filled without shutting down line pressure Oil supply tube check valve guarante

Alltrade Tools 870059 Snapon .25 in. Inline Combination Air Filter/Regulator $37.64 Alltrade designs supplies tools and shop equipment that meet and exceed our customers' expectations of quality service and value while achieving perfection Extends tool life by filtering particles out of airflow. Locking regulator with gauge offers convenient air flow regulation. .25 NPT threads.

AmStar Pneumaster Combination Air Filter, Pressure Regulator, Pressure Gauge Unit $87.95 ? Equiped with a sintered bronze filter element? Built to withstand chemicals and will not collapse most plastic plastic elements? Metal filter bowl with manual drain and sightglass? Max flow: 100 SCFM? Inlet/Outlet Size: 1/2''

Western Enterprises We Rs-7-5 Regulator. Each $230.03 Manufacturer: Western Enterprises. Each. 450 PSIG models have KEL-F seat accommodate high pressure applications Dual inlet filter system extends regulator life Hydrogen and methane models equipped with pipe away relief valves Nickel chrome plated zinc bon

Gentec 331452X80 452 Series Medium Duty Regulator $100.46 Underwriters Laboratories Inc. listed. Sintered bronze inlet filter . Chrome plated housing cap . Stem type seat assembly for more reliable performance . The Horse is a Harris style regulator with a Victor style seat mechanism . Self reseating external pressure relief valve on oxygen inert gas CO2 and nitrogen models

Gentec 331452Y15 452 Series Medium Duty Regulator $100.46 Underwriters Laboratories Inc. listed. Sintered bronze inlet filter . Chrome plated housing cap . Stem type seat assembly for more reliable performance . The Horse is a Harris style regulator with a Victor style seat mechanism . Self reseating external pressure relief valve on oxygen inert gas CO2 and nitrogen models

Coilhose Pneumatics 1668843R Heavy Duty Lubricator $68.76 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication. Bowl guard. Capacity Vol: 4 oz. Bowl Material: Polycarbonate. Inlet Size: 3/8 (NPT). Operating Pressure: 150.0 psi [Max]. Height: 7 . Diameter: 3 . Body Material: Die Cast Aluminum. Type: Lubricator.

Coilhose Pneumatics 1668844 Heavy Duty Lubricator $67.95 A tamperproof cap allows oil delivery rate to be locked in and once oil delivery is set proportional oiltoair delivery assures constant even lubrication. Capacity Vol: 8 oz. Bowl Material: Polycarbonate. Inlet Size: 1/2 (NPT). Operating Pressure: 150.0 psi [Max]. Height: 8 . Diameter: 31/2 . Body Material: Die Cast Aluminum. Type: Lubricator.