Elbow Fittings
2006
Elbow Fittings
 |
US $6.99
Can Tennis Elbow Surgery Help You? | We Care
Elbow Replacement
Your Elbow Surgery
The elbow is a hinge joint consisting of three bones. The upper part of the hinge is at the end of the upper arm bone (humerus), and the lower part of the hinge is at the top of the two forearm bones (radius and ulna) which are side by side. When the elbow is bent, the ends of the two forearm bones rub against the end of the humerus.
Bones of Elbow Joint
In a healthy elbow joint, the surfaces of these bones are very smooth and covered with a tough protective tissue called cartilage. Arthritis causes damage to the bone surfaces and cartilage where the three bones rub together. These damaged surfaces eventually become painful.
Arthritic Elbow Joint Surfaces
There are many ways to treat the pain caused by arthritis. One way is total elbow replacement surgery. The decision to have total elbow replacement surgery should be made very carefully after consulting your doctor and learning as much as you can about the elbow joint, arthritis, and the surgery.
In total elbow replacement surgery, an artificial hinge made of metal and a very durable plastic material is inserted into the joint so that the elbow can move without allowing the two forearm bones to contact the humerus. We call this artificial hinge an "implant."
Getting to the Joint
The patient is first taken into the operating room and given anesthesia. After the anesthesia has taken effect, the skin around the elbow is thoroughly scrubbed and sterilized with an antiseptic liquid. A tourniquet is then applied to the upper portion of the arm to help slow the flow of blood.
An incision about six inches long is then made over the elbow joint. The incision is gradually made deeper through muscle and other tissue until the bones of the elbow joint are exposed.
Preparing the Bones
One of the forearm bones, the ulna, has a projection at the end, which extends up and behind the end of the humerus. A special power saw is used to remove part of this projection.
This allows the two forearm bones to be rotated out of the way so parts of the humerus can be removed with the saw. Precision guides are used to help make sure that the cuts are made so the bones will align properly after the implant is inserted.
The middle portion at the end of the humerus is removed first.
The arm bones have relatively soft, porous bone tissue in the center. This part of the bone is called the "canal." Special instruments are used to clear some of this soft bone from the canal of the humerus. These instruments also help shape the canal to fit the shape of the implant.
Then, similar instruments are used to clear some of the soft bone and shape the canal of the ulna.
Attaching the Implants
The elbow implant consists of two metal stems that are connected by a metal locking pin. This pin passes through the ends of both stems, which are lined with a strong plastic material, serving as a bearing that allows the elbow to bend. The stems are inserted into each of the two prepared canals. A special kind of cement for bones is first injected into the canals to help hold the stems in place.
When the cement is hard, the two implant parts are brought together and the pin is inserted to connect them.
Stems Locked Together to Create Hinge
Closing the Wound
If necessary, the surgeon may adjust the ligaments that surround the elbow to achieve the best possible elbow function.
When all of the implants are in place and the ligaments are properly adjusted, the surgeon sews the layers of tissue back into their proper position. A plastic tube may be inserted into the wound to allow liquids to drain from the site during the first few hours after surgery. The edges of the skin are then sewn together, and the elbow is wrapped in a sterile bandage. Finally, the patient is taken to the recovery room.
Please log on to : Elbow Replacement
Please log on to : Get A Quote
We Care Core Values
"We have a very simple business model that keeps you as the centre."
Having the industry's most elaborate and exclusive Patient Care and Clinical Coordination teams stationed at each partner hospital, we provide you the smoothest and seamless care ever imagined. With a ratio of one Patient Care Manager to five patients our patient care standards are unmatched across the sub continent.
About the Author
Welcome to World Class Treatment and Surgery by We Care Health Services, India.
Contact Us : www.wecareindia.com
E-mail us on : info@indiahospitaltour.com
Contact Center Tel. : (+91) 9029304141 / (+91) 022 28941902
The surgery and medical treatments offered by We Care Health Services at JCI Accredited / ISO Certified Hospitals are vast and varied; ranging from Heart Surgery in India, Cardiology to Cardio Thoracic surgery, Total Knee / Hip / Ankle / Shoulder Joint Replacement Surgery in India including ACL reconstruction Surgery to Birmingham Hip Resurfacing Surgery in India , Spine Surgery in India like Discectomy / Laminectomy Surgery, Cervical Decompression to Anterior / Posterior Spinal Fusion Surgery in India, Chemotherapy, Radiotherapy, Cancer surgery, Sterotactic Radiotherapy, Autologous / Allogenic Bone Marrow Transplant Surgery to Breast Cancer treatments, Near relative Kidney Transplant Surgery to Dialysis and Kidney Biopsy, Low Cost Liver Transplants Surgery, Hysterectomy (Vaginal / Abdominal) to Ovarian Cystectomy, Hernia repair Surgery to Cholecystectomy, Advanced Neurosurgery in India, Bariatric surgery, Gastric Bypass Surgery in India, Eye Surgery in India, Cornea Transplant, Cataract Surgery to LASIK Eye care Surgery, IVF, ICSI, Egg Donor to Surrogacy, Minimally Invasive surgery or Laparoscopic Surgery to Cochlear Implants, Breast Lift / Tummy Tuck, Face Lift to Low Cost Rhinoplasty Cosmetic Surgery, multi specialty Hospitals in India offering first world treatments with board certified highly qualified medical consultants in attendance at third world prices..
|
|
Orbit .50 in. MNPT Riser Flex Elbow Fittings 37159 $20.49 High impact plastic construction. Ideal for connecting sprinkler heads to fittings from existing or new installations without the use of pipe clamps.50 MNPT x 2.50 cutoff and .50 barbed slip connection. Carded.50 MNPT street elbow. Length: 9. Width: 5.25. Height: 6.5 |
|
|
8 x 12.5mm Elbow Push In to Connect Male One Touch Fittings $4.2 Description:Please notice below size before ordering the item to avoid buying wrong thing.Made of good quality metal and plastic material and the Elbow One Touch Fittings is finished by good work.Elbow Push In to Connect Fittings are used in pneumatic piping.Metal male threads on one end of the Push In Fittings, hole for tubing on other end with push-in ring to release tubing.Elliptical release ring help to connect tube easily by manual, no special tools required.Light manual pressure on the elliptical release ring is all that is required to instantly disconnect each tube.Release ring inner diameter: ~8mmMale thread outer diameter: ~9.5mmTotal Size of the Male One Touch Fittings: ~1.5" x 1.1" x 0.6" (L*W*H)Weight: 17.8gColor: gold tone & bluePackage include:1 x Push In Fittings |
|
|
90 Degrees Threaded Copper Pipe Elbow fittings Female $4.99 Description:This is a 90 Degree Street ElbowHealthy and non-toxic, bacteriologically neutral, conforming to drinking water standardsResistant to high temperatures, good impact strengthUnique and unrivaled connection technique, convenient and reliable installation, low construction expensesExcellent heat-insulation property from minimum thermal conductivitySmooth inner walls of 90 Degree Pipe Elbow reduce pressure loss and increase flow speedCopper Elbow is widely used in cold and hot water supply systems for civil and industrial constructions, e.g in residential buildings, hospitals, hotels, school and office buildings, and ship buildingDrinking water systems and food industry pipe works90 Degree Female Elbow is also applicable for transportation of liquefied petroleum gasFor subterranean natural gas, coal gas and oxygenSize: 1/2 inchWeight: 43g |
|
|
8 x 20mm Elbow Push In Fitting One Touch L Male Fittings $4.7 Description:Please notice below size before ordering the item to avoid buying wrong thing.Made of good quality plastic and metal material and is finished by good work.The Elbow Push In Fitting is specially designed for Polyurethane or Nylon tubing. Convenient L Push In Fitting provide instant tubing connections.Elliptical release ring facilitates pneumatic installations in confined spaces.Light manual pressure on the elliptical release ring is all that is required to instantly disconnect each tube.Release ring inner diameter: ~8mmMale thread outer diameter: ~20mmTotal Size of the Elbow One Touch Fittings: ~1.5" x 0.8 x 1.2"(L*W*H)Weight of the Elbow Male Fittings: 27.5gColor: see the picturePackage include: 1 x Push In Fittings |
|
|
Plastic PVC-U 90 Degrees Drinking Water Pipe Street fittings Female Elbow $3.99 Description:This is a 90 Degree Street Elbow .Healthy and non-toxic, bacteriologically neutral, conforming to drinking water standardsSmooth inner walls of Pipe Elbow reduce pressure loss and increase flow speed90 Degree Female Elbow is widely used in family water supplySize of this Elbow : 20mm * 90degree6MPa, PVC-U.Colour: whiteWeight: 18g |
|
|
8 x 16.5mm L Push In to Connect One Touch Elbow Male Fittings $4.7 Description:Please notice below size before ordering the item to avoid buying wrong thing.Made of good quality plastic and metal material and is finished by good work.The Male Push In Fittings is specially designed for Polyurethane or Nylon tubing. Convenient L Push In Fittings provide instant tubing connections.Elliptical release ring facilitates pneumatic installations in confined spaces.Light manual pressure on the elliptical release ring is all that is required to instantly disconnect each tube.Release ring inner diameter: ~8mmMale thread outer diameter: ~16.5mmTotal Size of the Elbow One Touch Fittings: ~1.5" x 0.6 x 1.1"(L*W*H)Weight of the Push In to Connect Fittings: 20.5gColor: see the picturePackage include: 1 x Push In Fittings |
|
|
Alemite 0251623B Hydraulic Fittings $18.41 Applications: Industrial Machines Heavy Equipment. Body Material: Metal. Connection Type: Male/Male. Female Thread: 1/8 (NPTF). Length: 17/32 [Max]. Operating Pressure: 10000.0 psi [Max]. Shape: Elbow 65 Degree. Type: Hydraulic Fitting. Wrench Size: 7/16 . |
|
|
Alemite 0251638B Hydraulic Fittings $20.58 Applications: Industrial Machines Heavy Equipment. Body Material: Metal. Connection Type: Male/Male. Male Thread: 1/8 (PTF). Length: 23/32 [Max]. Operating Pressure: 10000.0 psi [Max]. Shape: Elbow 30 Degree. Type: Hydraulic Fitting. Wrench Size: 7/16 . |
|
|
Alemite 0251649B Hydraulic Fittings $20.45 Applications: Industrial Machines Heavy Equipment. Body Material: Metal. Connection Type: Male/Male. Male Thread: 1/8 (PTF). Length: 23/4 [Max]. Operating Pressure: 10000.0 psi [Max]. Shape: Elbow 65 Degree. Type: Hydraulic Fitting. Wrench Size: 3/8 . |
|
|
B'Cuzz Dutch Leach Tray with Fittings: J $13.68 This is the tray complete with fittings. L x W x D : 40'' x 7'' x 4'' Heavy duty plastic leach tray. Comes with fittings, elbows and end caps. Designed to work with 6'' rock wool slabs, but also works well with a variety of other growing mediums. J_707435 : B'cuzz Dutch Leach Tray Elbow: J J_707440 : B'cuzz Dutch Leach Tray Endcap: J J_707430 : B'Cuzz Dutch Leach Tray with Fittings: J |
|
|
Flair It Flair It 3 8x1 2mpt Elbow 16799 $2.43 3/8x1/2mpt elbow Elbow with Male pipe thread and a Flair-It conneciton 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX only, to use on polybutylene use adapter model No. 26790 3/8? PEX x 1/2? MPT Brand #: Flair It 16799 UPC: 742979167994 Keywords: elbow pex fitting male |
|
|
Flair It Flair It 1 2x1 2mpt Elbow 16803 $2.43 1/2x1/2mpt elbow Elbow with Male pipe thread and a Flair-It conneciton 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX only, to use on polybutylene use adapter model No. 26790 1/2? PEX x 1/2? MPT Brand #: Flair It 16803 UPC: 742979168038 Keywords: elbow pex fitting male |
|
|
Flair It Flair It 3 4x3 4mpt Elbow 16809 $3.37 3/4x3/4mpt elbow Elbow with Male pipe thread and a Flair-It conneciton 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX only, to use on polybutylene use adapter model No. 26790 3/4? PEX x 3/4? MPT Brand #: Flair It 16809 UPC: 742979168090 Keywords: elbow pex fitting male |
|
|
Flair It Flair It 1 2x3 8mpt Elbow 16810 $2.35 1/2x3/8mpt elbow Elbow with Male pipe thread and a Flair-It conneciton 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX only, to use on polybutylene use adapter model No. 26790 1/2? PEX x 3/8? MPT Brand #: Flair It 16810 UPC: 742979168106 Keywords: elbow pex fitting male |
|
|
Flair It Flair It 1 2x3 4mpt Elbow 16812 $2.84 1/2x3/4mpt elbow Elbow with Male pipe thread and a Flair-It conneciton 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX only, to use on polybutylene use adapter model No. 26790 1/2? PEX x 3/4? MPT Brand #: Flair It 16812 UPC: 742979168120 Keywords: elbow pex fitting male |
|
|
B'cuzz Dutch Leach Tray Elbow: J $1.28 This is the elbow only, not the whole tray. L x W x D : 40'' x 7'' x 4'' Heavy duty plastic leach tray. Comes with fittings, elbows and end caps. Designed to work with 6'' rock wool slabs, but also works well with a variety of other growing mediums. J_707435 : B'cuzz Dutch Leach Tray Elbow: J J_707440 : B'cuzz Dutch Leach Tray Endcap: J J_707430 : B'Cuzz Dutch Leach Tray with Fittings: J |
|
|
Cash Acme Cash Acme 3 4x3 4fip Dropear Elbow U340A $11.35 3/4x3/4fip dropear elbow 3/4? x 3/4? drop ear elbow can be used to connect copper, CTS, CPV, and PEX pipe in any combination Presents a revolutionary solution to connecting water distribution pipe The fittings are certified for underground applications and as a manufactured joint without access panels It meets UPC, IPC, and CUPC requirements Design certified and listed to ASSE 1061/NSF61 The fittings are rated at 200 F., 200 P.S.I It is made of 1-piece DZR brass, which is noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removable and reuseable Brand #: Cash Acme U340A UPC: 697285601390 Keywords: push fitting elbow drop ear fip |
|
|
Flair It Flair It 1 2x1 2 Pex Elbow 16800 $2.35 1/2x1/2 pex elbow Elbow with Flair-It connection on both ends 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX tubing only, to use on polybutylene use adapter model No. 26790 1/2? PEX x 1/2? PEX Brand #: Flair It 16800 UPC: 742979168007 Keywords: pex fitting elbow connector |
|
|
Flair It Flair It 1 2x3 4 Pex Elbow 16805 $4.58 1/2x3/4 pex elbow Elbow with Flair-It connection on both ends 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX tubing only, to use on polybutylene use adapter model No. 26790 1/2? PEX x 3/4? PEX Brand #: Flair It 16805 UPC: 742979168052 Keywords: pex fitting elbow connector |
|
|
Flair It Flair It 3 4x3 4 Pex Elbow 16806 $3.59 3/4x3/4 pex elbow Elbow with Flair-It connection on both ends 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX tubing only, to use on polybutylene use adapter model No. 26790 3/4? PEX x 3/4? PEX Brand #: Flair It 16806 UPC: 742979168069 Keywords: pex fitting elbow connector |
|
|
Flair It Flair It 3 8x3 8 Pex Elbow 16815 $2.35 3/8x3/8 pex elbow Elbow with Flair-It connection on both ends 3/8? and 1/2? fittings will fit PEX or polybutylene tubing 3/4? fittings will fit PEX tubing only, to use on polybutylene use adapter model No. 26790 3/8? PEX x 3/8? PEX Brand #: Flair It 16815 UPC: 742979168151 Keywords: pex fitting elbow connector |
|
|
Advanced Drainage Sy. Advanced Drainage Sy. 4 in 90d Elbow 490AA $3.62 4? 90d elbow Corrugated fittings are made from strong lightweight polyethylene plastic - won't break or crush and resists acids, alkalis, and freezing temperatures Ideal for drainage and waste management Brand #: Advanced Drainage Sy. 490AA UPC: 096942302104 Keywords: corrugtd drnge pipe ftng elbow drain sewer fitting |
|
|
Watts Watts 3 8ctsx1 2fpt Q c Elbow P-436 $3.58 3/8ctsx1/2fpt q/c elbow CTS quick connect x F.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 3/8? CTS x 1/2? FPT swivel elbow Brand #: Watts P-436 UPC: 098268298611 Keywords: quick connect elbow cts 90 push fittings |
|
|
Watts Watts 1 2ctsx1 2fpt Q c Elbow P-635 $4.06 1/2ctsx1/2fpt q/c elbow CTS quick connect x F.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? CTS x 1/2? FTP swivel elbow Brand #: Watts P-635 UPC: 098268299373 Keywords: quick connect elbow cts 90 push fittings |
|
|
Watts Watts 1 2ctsx3 4fpt Q c Elbow P-637 $6 1/2ctsx3/4fpt q/c elbow CTS quick connect x F.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? CTS x 3/4? FPT swivel elbow Brand #: Watts P-637 UPC: 098268299380 Keywords: quick connect elbow cts 90 push fittings |
|
|
Watts Watts 1 2ctsx1 2fpt Drop Elbow P-638 $4.82 1/2ctsx1/2fpt drop elbow CTS quick connect x F.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? CTS x 1/2? F.I.P. drop ear elbow Brand #: Watts P-638 UPC: 098268299397 Keywords: quick connect elbow cts 90 push fittings |
|
|
Watts Watts 1 2ctsx7 8bc Q c Elbow P-639 $6.38 1/2ctsx7/8bc q/c elbow CTS quick connect x F.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? x 7/8? BC quick connect elbow Brand #: Watts P-639 UPC: 098268299441 Keywords: quick connect elbow cts 90 push fittings |
|
|
Zurn Pexqest 1in. Poly Elbow QQPE55XPK1 $23.77 Elbow |
|
|
Cash Acme Cash Acme 1 2mipx1 2 in Shark Elbow U280A $6.36 1/2mipx1/2? shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 P.S.I It is made of a 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged Brand #: Cash Acme U280A UPC: 697285914674 Keywords: elbow brass mip push fitting |
|
|
Cash Acme Cash Acme 1 2fipx1 2 in Shark Elbow U308A $6.63 1/2fipx1/2? shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 P.S.I It is made of a 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged Brand #: Cash Acme U308A UPC: 697285914650 Keywords: elbow push fitting brass fip |
|
|
Cash Acme Cash Acme 3 4x1 2 Shark Elbow U274A $8.43 3/4x1/2 shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged Brand #: Cash Acme U274A UPC: 697285910966 Keywords: elbow brass reducing push fitting fit |
|
|
Cash Acme Cash Acme 1 4x1 4 Shark Elbow U244A $7.3 1/4x1/4 shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged 1/4? Brand #: Cash Acme U244A UPC: 697285603998 Keywords: elbow brass push fit fitting |
|
|
Cash Acme Cash Acme 3 8 inx3 8 in Elbow U246A $9.64 3/8?x3/8? elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged 3/8? Brand #: Cash Acme U246A UPC: 697285601215 Keywords: elbow brass push fit fitting |
|
|
Cash Acme Cash Acme 1 2x1 2 Shark Elbow U248A $6.6 1/2x1/2 shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged 1/2? Brand #: Cash Acme U248A UPC: 697285910997 Keywords: elbow brass push fit fitting |
|
|
Cash Acme Cash Acme 3 4x3 4 Shark Elbow U256A $8 3/4x3/4 shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged 3/4? Brand #: Cash Acme U256A UPC: 697285910980 Keywords: elbow brass push fit fitting |
|
|
Cash Acme Cash Acme 1x1 Shark Elbow U260A $15.18 1x1 shark elbow Brass push fitting UPC, IAPMO, and NSF-61 certified and approved The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI It is made of 1-piece DZR brass, which is a noncorrosive, low lead material Fittings can be buried and placed behind drywall Fittings are removeable and reuseable Product is individually bagged 1? Brand #: Cash Acme U260A UPC: 697285910973 Keywords: elbow brass push fit fitting |
|
|
Watts Watts 1 2ctsx1 2mpt Q c Elbow P-630 $3.09 1/2ctsx1/2mpt q/c elbow CTS quick connect x M.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? x 1/2? Brand #: Watts P-630 UPC: 098268299359 Keywords: quick connect elbow mip 90 push fittings cts |
|
|
Watts Watts 1 2ctsx3 8mpt Q c Elbow P-631 $3.34 1/2ctsx3/8mpt q/c elbow CTS quick connect x M.I.P 90 elbow (push type) for PEX, copper, CPVC, and potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? x 3/8? Brand #: Watts P-631 UPC: 098268299366 Keywords: quick connect elbow mip 90 push fittings cts |
|
|
Watts Watts 3 8x3 8 incts Q c Elbow P-420 $3.44 3/8x3/8?cts q/c elbow CTS quick connect 90 elbow (push type) for PEX, copper, CPVC, amd potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 3/8? x 3/8? Brand #: Watts P-420 UPC: 098268298598 Keywords: quick connect elbow cts 90 push fittings |
|
|
Watts Watts 1 2x1 2 incts Q c Elbow P-620 $3.98 1/2x1/2?cts q/c elbow CTS quick connect 90 elbow (push type) for PEX, copper, CPVC, amd potable plumbing pipe Eliminates the need to cut small pieces of pipe to join fittings Can be easily disconnected and reused without any tools Approved for behind the wall and underground installations without the use of access panels (always check local codes) Holds up to 250 P.S.I. at 75 F. IAPMO, NSF 61, CSA/ASTM and UPC Code Approved 1/2? x 1/2? Brand #: Watts P-620 UPC: 098268299342 Keywords: quick connect elbow cts 90 push fittings |
Comment