Sirsalliyan Small Air Compressor

Angle Head Air

About Air Rivet Guns

Air rivet guns are not the weapons used in warfare; rather it is a type of tool used to drive rivets powered by air. Rivets are the permanent mechanical fasteners supporting tension loads. The manufactured head side of the rivet uses air guns while the bucktail side of the rivet uses bucking bar. Large rivet guns are used to drive rivets in structural steels. Smaller ones which can be held by one hand are used in aircraft assembly. They vary in size.

* How the air rivet gun works:

A regulator adjusts the amount of air entering the tool. A trigger in the handgrip controls the regulated air as it enters and passes the throttle valve. By squeezing the trigger, the throttle valve allows pressure air to enter the piston. Movement of the piston allows the port to open allowing the escape of air pressure. The piston hits the rivet set again. The force on the rivet set prods into the wall and against the buck. The buck deformed the rivet’s tail. The piston returns in its original place by a spring on the shifter of a valve letting air to push piston back to the staring point.

* There are several types of air rivet guns:

1. One-shot gun takes only a single blow to drive the rivet. It is large and heavy compared with the other types for it is used for heavy riveting. The gun strikes one blow each time the trigger is depressed. Its size makes it hard to control on light gauze metals. Under general conditions, this is the fastest method of riveting.

2. Slow hitting gun is able to strike several blows as long as the trigger is held down. The repetition rate is 2,500 blows per minute (BPM). It is easier to control than the one-shot gun. This is the most common type.

3. Fast hitting gun hits multiple high-weights blows at a high rate as long as the trigger is held down. These are in the range of 2,500 to 5,000 BPM. The fast hitting gun vibration is used for soft rivet.

4. Corner Riveter, a compact rivet gun, can be used in closed spaces. The rivet is driven at right angles to handle spaces by a short barreled drive.

5. Squeeze Riveter uses air pressure to provide a squeeze action that compresses the rivet from both sides rather than distinct blows. The squeeze can only be used closed to the edge because of the depth of anvil. With the proper adjustment, the squeeze rivet will produce very uniform rivet bucks. The stationary (fixed) jaw is placed against the head and compressed by the action of the gun.

By the use of air rivet guns, rivets can be used to permanently and mechanically fasten and support tension loads.

About the Author

Weenie Rifareal is an Asian homebased online worker dealing with SEO, internet marketing and article writing. Read more about air rivet guns at http://www.airrivetgun.com

1/4'' Angle Air Die Grinder $68.95 ? Collet size 1/4'' ? 90? angle head for restricted areas ? Built-in speed regulator ? Safety throttle lever for positive speed control ? Rear diffused exhaust directs air away from work surface ? Ball bearing construction for long tool life ? 20,000 RPM free speedBy Sunex International.

Mini Angle Air Die Grinder $81.95 ? Compact, lightweight design for easy maneuverability ? Lock off throttle to prevent accidental start up ? 90 degree angle head allows flexibility in tight quarters ? Complete with 1/4'' and 6mm collet ? Applications: high speed blending, smoothing, porting and deburring in confined areas ? Free Speed: 21000 rpm Specifications: Collet/Spindle Size in.: 1/4 Weight lb.: 1 Length in.: 4-7/8 Average Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 21000 By Chicago Pneumatic.

1/4'' Mini Right Angle Air Die Grinder $57.95 ? Collet size 1/4'' ? 90 degree angle head ? Built-in speed regulator ? Safety throttle lever for positive speed control ? Ball bearing construction for long tool life ? 20,000 RPM free speed.By Sunex International.

Chicago Pneumatic 3/8'' Reversible Angle Air Drill $136.95 ? Compact, low profile head for drilling in confined areas ? Convenient reverse valve for simple directional changes ? Rear exhaust directs air away from the workpiece ? Teasing throttle for control from start-up thru run down ? Applications: screwdriving, drilling in hard to reach areas ? Free Speed: 1800 rpm Specifications: Chuck Size in.: 3/8 Weight lb.: 2-1/4 Length in.: 8-1/4 Aveerage Air Consumption CFM: 4 Air Inlet NPTF in.: 1/4 Free Speed rpm: 1800By Chicago Pneumatic.

Astro Pneumatic 3/8'' Right-Angle Air Drill Reversible $104.95 ? 90 degree angle head design ? Compact design for close clearance operation ? 2 gear drive system ? Lightweight for fatigue free handling Specifications: Free speed: 1,600 RPM Overall length: 8-1/4'' (210 mm) Net weight: 2 lbs. (0.91 kg) Motor HP: 1/2'' Air inlet thread NPT: 1/4'' Average air consumption: 4 CFM Working air pressure: 90-120 PSI By Astro Pneumatic.

Astro Pneumatic 3/8 Inch Right-Angle Air Drill Reversible $98.99 90 degree angle head design Compact design for close clearance operation 2 gear drive system Lightweight for fatigue free handling Specifications: Free speed: 1,600 RPM Overall length: 8-1/4 inch (210 mm) Net weight: 2 lbs. (0. 91 kg) Motor HP: 1/2 inch Air inlet thread NPT: 1/4 inch Average air consumption: 4 CFM Working air pressure: 90-120 PSI

Astro Pneumatic Heavy-Duty 1/4'' Angle Head Air Grinder and Standard Duty 1/4'' Air Die Grinder Combo Set $80.95 Blue Composite Body 1/4'' 90? Angle Die Grinder - 1240? Composite handle reduces vibration? Rib textured handle provides a firm grip? Compact and light weight? Lever throttle for feathering control? Front exhaust? Built-in regulator? 20,000 rpm - 1/3hpComposite Body 1/4'' Medium Die Grinder - 1206A:? Rear exhaust air flow system directs air away from work surface? Compact and light weight? Built-in regulator? Safety lever? 20,000 rpm - 1/3hp

Complete Surface Prep Kit With 90 Degree Angle Air Die Grinder $97.95 ? Ideal for cleaning and polishing engine heads and detail sanding ? Patent #5,332,098 ? Weight 3 lbs. ? Kit includes: 1/4'' angle head die grinder (T20AH), 5 pc. 2'' surface prep pads with holder, 5 pc. 3'' surface prep pads with holder, spanner wrench, 1/8'' collet, 10 pc. stone assortment Air Grinder Specifications: Collet size: 1/4'' Free speed: 25,000 RPM Overall lenght: 4-7/8'' Net Weight: 1 lb. Motor HP: 1/3 Air inlet thread: 1/4'' NPT Average air consumption: 3 CFM By Astro Pneumatic.

Chicago Pneumatic CP 875 Mini Angle Air Die Grinder $82.24 Compact lightweight design for easy maneuverability. Lock off throttle to prevent accidental start up. 90 degree angle head allows flexibility in tight quarters. Complete with 1/4 and 6mm collet. Applications: high speed blending smoothing porting and deburring in confined areas. Free Speed: 21000 rpmSpecifications:Collet/Spindle Size in.: 1/4Weight lb.: 1Length in.: 47/8Average Air Consumption CFM: 4Air Inlet NPTF in.: 1/4Free Speed rpm: 21000

Chicago Pneumatic CPT857 7 Inch Heavy Duty Air Angle Grinder $920.15 Features and Benefits: Powerful 1.25 hp high performance motor for fast metal removal Aluminum alloy housing is rugged yet lightweight Spiral bevel gearing in angle head for long tool life and low vibration Removable side handle for increased maneuverability Use with 7 type 27 grinding wheels for cleaning deburring blending and smoothingSpindle size: 1/4 ; wheel size: 7 ; free speed: 7500 RPM; average air consumption: 6 cfm; air inlet thread: 1/4 NPTF; minimum hose size: 3/8 ; sound dBA: 102; length: 13.13 ; weight: 6.25 lbs.

Ingersoll Rand Heavy Duty Air Angle Die Grinder. Each $123.64 Manufacturer: Ingersoll Rand. Each. Features Benefits: Right angle head Compact and designed well for grinding, porting, polishing, de-burring, and breaking sharp edges Durable and long-lasting All ball bearing construction Precision-machined steel gea

Chicago Pneumatic 4" Air Angle Grinder. Each $304.74 Manufacturer: Chicago Pneumatic. Each. Features Benefits: Aluminum alloy housing is rugged yet lightweight for maximum operator comfort Spiral bevel gearing in angle head provides extended life and smooth low vibration Powerful .6 hp high performance m

Chicago Pneumatic 7" Air Angle Grinder. Each $658.64 Manufacturer: Chicago Pneumatic. Each. Features Benefits: Powerful 1.25 hp high performance motor for fast metal removal Aluminum alloy housing is rugged yet lightweight Spiral bevel gearing in angle head for long tool life and low vibration Removable

Ingersoll-Rand 3/8'' Standard Duty Air Angle Reversible Drill $124.95 ? An economical choice, the IR 7807R is excellent at service work requiring a compact, low profile angle head. It's a durable, reliable tool for drilling in all types of materials. ? Durable Jacobs multi-craft chuck ? Reversible, with convenient reverse control ? Comfortable lever throttle ? Grease plug for easy maintenance ? Precision machined gearing ensures maximum power transfer and durability Specifications: Free speed: 1800 rpm Chuck size: 3/8'' Rated power: 0.33 hp Weight: 2.47 lbs. (1.12 kg) Overall length: 8.1'' (2.06 mm) Average air consumption: 4 cfm, @ load 17 cfm Sound (pressure/power): 89/102 dBA Air inlet: 1/4''By Ingersoll-Rand.

Ingersoll-Rand 3/8 Inch Standard Duty Air Angle Reversible Drill $111.37 An economical choice, the IR 7807R is excellent at service work requiring a compact, low profile angle head. It s a durable, reliable tool for drilling in all types of materials. Durable Jacobs multi-craft chuck Reversible, with convenient reverse control Comfortable lever throttle Grease plug for easy maintenance Precision machined gearing ensures maximum power transfer and durability Specifications: Free speed: 1800 rpm Chuck size: 3/8 inch Rated power: 0. 33 hp Weight: 2. 47 lbs. (1. 12 kg) Overall length: 8. 1 inch (2. 06 mm) Average air consumption: 4 cfm, load 17 cfm Sound (pressure/power): 89/102 dBA Air inlet: 1/4 inch

Chicago Pneumatic CPT854 4 Inch Heavy Duty Air Angle Grinder $412.43 Features and Benefits: Powerful .6 hp high performance motor for fast efficient grinding in tight quarters Aluminum alloy housing is rugged yet lightweight for maximum operator comfort Spiral bevel gearing in angle head provides extended life and smooth low vibration Removable dead handle allows access to tight quarter work Applications: weld preparation and smoothing; rust removal; deburring and blending of steel cast iron and aluminumSpindle size; 3/8 24; 4 wheel size; free speed: 12 000 RPM; average air consumption: 6 cfm; air inlet thread: 1/4 NPTF; minimum hose size: 3/8 ; sound dBA: 85; length: 9 ; weight: 3.75 lbs.

The Story of Johnny Head-in-Air $39.99 The Story of Johnny Head-in-Air - Giclee Print

Chicago Pneumatic 3/8 Inch Reversible Angle Air Drill $115.52 Compact, low profile head for drilling in confined areas Convenient reverse valve for simple directional changes Rear exhaust directs air away from the workpiece Teasing throttle for control from start-up thru run down Applications: screwdriving, drilling in hard to reach areas Free Speed: 1800 rpm Specifications: Chuck Size in. 3/8 Weight lb. 2-1/4 Length in. 8-1/4 Aveerage Air Consumption CFM: 4 Air Inlet NPTF in. 1/4 Free Speed rpm: 1800

Chicago Pneumatic 3/8" Air Reversible Angle Drill. Each $108.94 Manufacturer: Chicago Pneumatic. Each. Features Benefits: Compact, low profile head for drilling in confined areas Convenient reverse valve for simple directional changes Rear exhaust directs air away from the work piece Teasing throttle for control fr

Ingersoll Rand 7807R .375 Inch Standard Duty Air Angle Reversible Drill $131.51 The Standard Duty Air Angle Reversible Drill is an excellent choice for service work requiring a compact low profile angle head. It s a durable reliable tool for drilling in all types of materials including sheet metal wood and composites. Features: Durable Jacobs multicraft chuck Reversible with convenient control Comfortable lever throttle Grease plug for easy preventative maintenance Precision machine gearing ensures maximum power transfer and durability

Low Angle View of a Skier in Mid Air $24.99 Low Angle View of a Skier in Mid Air - Photographic Print

Mountain MTN7311 90 Degree 1/4 Inch Angle Head Die Grinder $66.67 Features and Benefits: Lever throttle for feathering control Compact and lightweight composite body Safety lever Built in speed regulator Front exhaust Rib textured handle provides firm gripSpecifications: Collet size: 1/4 Motor H.P.: 1/4 Free speed: 20 000 RPM Air inlet thread: 1/4 NPT Air hose I.D. size: 3/8 Net weight: 1 lbs. Overall length: 53/4 Avg. air consumption: 3 cfm Noise level: 89 dBA 90 PSI

Astro 2010 Complete Surface Prep Kit with 90 Degree Angle Air Die Grinder $93.53 Ideal for cleaning and polishing engine heads and detail sanding Kit includes: 1/4 angle head die grinder (T20AH) 5 pc. 2 surface prep pads with holder 5 pc. 3 surface prep pads with holder spanner wrench 1/8 collet 10 pc. Stone assortment Air Grinder Specifications: Collet size: 1/4 Free speed: 25 000 RPM Overall lenght: 47/8 Net Weight: 1 lb. Motor HP: 1/3 Air inlet thread: 1/4 NPT Average air consumption: 3 CFM

JET 526340 AG-4S, 4-in Industrial Air Angle Grinder $439 4-in Industrial Air Angle Grinder - 526340

Ingersoll Rand 3/8" Standard Duty Air Angle Reversible Drill. Each $107.74 Manufacturer: Ingersoll Rand. Each. Features Benefits: One in a new family of economical, standard duty tools, the IRT7807R is an excellent choice for service work requiring a compact, low profile angle head. It's a durable, reliable tool for drilling i

Super Duty Composite Right Angle Air Die Grinder - 1/3 Hp $154.95 ? Use this powerful die grinder in various applications including porting, weld braking, deburring, polishing, and grinding, just to name a few. ? Powerful 1/3 horsepower motor ? Lightweight yet duable design ? All ball bearing construction ? Safety release throttle ? Positive grip 1/4'' capacity collet chuck ? Ergonomic and durable composite housing ? Multi-position head. ? 20,000 RPMBy Ingersoll-Rand.